CyClone 360 Fade or Flash Q10 RED, Pattern Direction Foward or Reverse, Pattern Q10 Green

Page 5

Below are two charts for the Fade Time and Follow Time values.

Fade Time Value chart

Value

Function

Calculated Time

 

 

 

 

0

OFF

Fade Time OFF - Effects Disabled

 

 

 

 

1-50

Low Speed rate

Full Color fade time 3 minutes - 1 minute

51-100

High Speed Rate

Full Color fade time 1 minutes - 3 seconds

 

 

 

 

Follow Time Chart

 

 

 

 

 

 

Value

Function

Calculated Time

 

 

 

 

 

0-50

Follow Time Long

Follow Time 1 minute- 30 seconds

 

 

 

 

 

51-99

Follow Time Short

Follow Time 30 seconds - 1 second

 

100

OFF

Follow Time OFF

 

Play with the RED (Fade Time) and GREEN (Folow Time) dimmer values and see how they affect the speed of the of the circling GREEN Cluster. The disable the effects set the RED (Fade Time) to 0.

The Cyclone360 Q9 BLUE channel 9 is not used and reserved for future use.

Fade or Flash (Q10 RED)

The Cyclone360 can be set to fade or flash by adjusting Q10 RED dimmer. This is an easy adjustment dimmer levels 0 to 49 set the Cyclone360 to Fade setting the dimmer from 50 to 100 disables the Fade and set the Cyclone360 to flash through the selected colors. When Flash is enabled the Follow Time value is disabled.

Try it. Your Cyclone360 should still be circling a GREEN cluster. Press Q10 and Press the RED UP button until the display reads 100 or any value above 49. Wow thats fast.... Press Q9 then press RED DN button to slow the speed

of the Cyclone360. Play with the Fade Time (Q9 RED) value and see how it affects the speed of the circling GREEN cluster.

Pattern Direction (Foward or Reverse)

Here is a another easy one. Q10 BLUE will adjust the direction of the pattern Foward or Reverse. 0 to 49 sets the direction to Foward and 50 to 100 set the direction to Reverse. Go ahead and just give it a whirl.... no pun intended.

Pattern (Q10 GREEN)

This adjustment set the Cyclone360 to run 1 of 5 preset patterns. All the example effects we have been reviewing have been pattern 1 which is a simple circular pattern. Pattern 2 through 5 are a collection of patterns when used with multiple colored clusters along with fade time and follow time values will create some cool effects. Pattern table list the pattern and the dimmer level for each pattern

Pattern Number

Dimmer Level

 

 

1

0 to 20

2

21-40

3

41-60

4

61-80

5

81-100

4

Image 5
Contents Cyclone360 Introduction Selecting the Mode Power up the Cyclone360Cyclone360 Overview Getting StartedEffects SelectEffects Definitions Pattern Direction Foward or Reverse Fade or Flash Q10 REDPattern Q10 Green Pattern Number Dimmer LevelPattern Editing Cluster Colors Single ModePatterns Introducing Remeber fade rates are perportional to dimmer values How do I remove the dead spot in my ColorRoll ?Need a Disco Look ? ColorMaker can do it Adjusting the ColorRoll Fade Rate ExampleFade Rate Values Saved to Memory Page Warranty