Starting and Stopping

STARTING AND OPERATING TIPS

•Store and fuel equipment in level position.

•Use fresh fuel.

•Use correct type of oil for expected starting temperature.

•Remove external equipment/engine loads.

•Periodically remove any debris buildup from the machine.

•After engine has started, let it warm up several seconds to several minutes, depending on outside temperature.

•For maximum performance and life, operate engine with choke in RUN and throttle in FAST.

TO START ENGINE

•Check oil level.

•Open fuel shut-off valve (if equipped).

•Move choke control to CHOKE position.

•Move throttle (if equipped) to FAST position. Operate engine with throttle in FAST.

•Push rocker switch (if equipped) to ON.

•Insert key and turn to START.

•Let engine warm up. Slowly adjust choke control toward RUN position. Wait until engine runs smoothly before each choke adjustment.

NOTE: If so equipped, you can start the machine with the rope handle. Grasp rope handle. Pull slowly until resistance is felt, then pull rapidly to start engine and avoid kickback.

TO STOP ENGINE

•Move throttle to SLOW position.

•Turn key to OFF. Remove key and store out of reach of children.

•Push rocker switch (if equipped) to OFF.

•Close fuel shut-off valve (if equipped).

Operation Notes

•At engine start-up, the engine of your chipper operates under no load until approximately 1200-1400 RPM’S at which speed the centrifugal clutch engages and begins driving the rotor.

•Proper rotor speed is 2400 RPM +/- 200 RPM.

•When viewed from the operator zone, the flywheel turns in a clockwise direction. This rotation pulls branches into the chipper.

•Always wear protective gloves and safety glasses during operation of the chipper.

•If it becomes necessary to push material into the chipper hopper, only use a wood stick, never your hands or anything steel.

•Never assume you know where the knife is. You don’t know where it is. Always keep hands out of the chipper hopper.

•Keep area of discharge clear of people, animals, buildings, glass or anything else that will obstruct clear discharge, cause injury or damage. Wind can also change discharge direction, so be aware.

C123E-CHP specifications

The Country Home Products C123E-CHP is a versatile and efficient chipper shredder designed to tackle various outdoor debris, making yard maintenance easier and more sustainable. This powerful machine is particularly well-suited for homeowners who want to manage their garden waste without relying on external disposal methods.

One of the standout features of the C123E-CHP is its robust engine. Equipped with a reliable and durable horsepower motor, it provides the necessary torque to process tough branches, leaves, and other organic materials quickly. The engine is designed for optimal performance, ensuring minimal downtime for maintenance while maximizing energy efficiency.

Another significant characteristic of the C123E-CHP is its dual feed system. The combination of a large chipper chute and a shredding hopper allows users to feed in various sizes of material easily. The chipper chute is ideal for larger branches up to three inches in diameter, while the shredding hopper is designed for softer materials like leaves and small twigs. This dual functionality increases the machine's versatility, catering to a wider range of yard debris.

The C123E-CHP also incorporates advanced cutting technology. The machine comes with hardened steel blades that are not only sharp for clean cuts but also built to withstand wear and tear. This cutting system ensures speedy processing of organic materials and produces finely shredded mulch that can be reused in gardens or flower beds, promoting nutrient recycling.

User safety and convenience are also prioritized in the design of the C123E-CHP. The machine features a protective housing that prevents debris from flying out during operation. This safety feature, combined with easy-access controls and a comfortable handle, enhances the overall user experience. Maintenance is further simplified with easily accessible components, making it convenient for users to clean and service the machine.

In summary, the Country Home Products C123E-CHP is engineered for efficiency, durability, and user-friendliness. Its powerful engine, dual feed system, advanced cutting technology, and safety features come together to create a reliable tool for yard maintenance. This machine not only simplifies the process of managing yard waste but also encourages sustainable practices by turning organic debris into useful mulch for gardens. Whether you're a seasoned gardener or just starting, the C123E-CHP is an invaluable addition to your outdoor arsenal.