Safety First

SECTION IV - CHIPPING

THIS CHIPPER WAS DESIGNED FOR CHIPPING LIMBS OR BRANCHES. NEVER USE THIS MACHINE FOR ANY OTHER PURPOSE AS IT COULD CAUSE SERIOUS INJURY.

•Always wear protective gloves and safety glasses during operation of the chipper.

•Never allow your hands or any part of your body or clothing inside the chipper hopper or discharge area of the chipper.

•Keep all protective guards and warning labels on the machine and in good working condition.

•Always stand clear of the discharge area when the chipper is running.

•Keep your face and body back from the chipper hopper to avoid being struck by any material that may bounce back.

•Keep proper balance and footing while operating the chipper.

•If it becomes necessary to push material into the chipper hopper, only use a wood stick, never your hands or anything steel.

•Never assume you know where the chipper knife is. You do not know where it is.

•Keep area of discharge clear of people, animals, buildings, glass or anything else that will obstruct clear discharge, cause injury or damage. Wind can also change discharge direction, so be aware.

•Always keep hands out of the chipper hopper.

•Never operate the chipper without the chipper hopper in place.

•Do not transport the chipper while the engine is running.

•Do not refuel the engine while it is hot, warm, or running.

•Do not cover the chipper while the muffler is still hot.

PROCESSING LIMBS OR BRANCHES

•Your chipper can process dry or green material.

•Remove side limbs, branches or twigs from main branch.

•Feed branch into chipper hopper.

•Keep branch at same angle as chipper hopper.

•As the branch becomes short and is inside the chipper hopper, finish processing it by pushing it into the chipper with the next branch.

•If branches are 2” or larger in diameter, feed only one branch at a time into the chipper.

•If branches are smaller than 2”, more than one at a time can be fed into the chipper.

•Green branches process quicker and easier than dry branches.

•Soft wood processes easier than hard wood.

•When chipping branches, sometimes a tail will be left at the end of the branch (usually green wood) that will increase in length as you chip. To avoid this, rotate or twist the branch as you feed it into the chute.

•Rotating the branch as you feed it into the machine will improve chipping performance.

C123E-CHP specifications

The Country Home Products C123E-CHP is a versatile and efficient chipper shredder designed to tackle various outdoor debris, making yard maintenance easier and more sustainable. This powerful machine is particularly well-suited for homeowners who want to manage their garden waste without relying on external disposal methods.

One of the standout features of the C123E-CHP is its robust engine. Equipped with a reliable and durable horsepower motor, it provides the necessary torque to process tough branches, leaves, and other organic materials quickly. The engine is designed for optimal performance, ensuring minimal downtime for maintenance while maximizing energy efficiency.

Another significant characteristic of the C123E-CHP is its dual feed system. The combination of a large chipper chute and a shredding hopper allows users to feed in various sizes of material easily. The chipper chute is ideal for larger branches up to three inches in diameter, while the shredding hopper is designed for softer materials like leaves and small twigs. This dual functionality increases the machine's versatility, catering to a wider range of yard debris.

The C123E-CHP also incorporates advanced cutting technology. The machine comes with hardened steel blades that are not only sharp for clean cuts but also built to withstand wear and tear. This cutting system ensures speedy processing of organic materials and produces finely shredded mulch that can be reused in gardens or flower beds, promoting nutrient recycling.

User safety and convenience are also prioritized in the design of the C123E-CHP. The machine features a protective housing that prevents debris from flying out during operation. This safety feature, combined with easy-access controls and a comfortable handle, enhances the overall user experience. Maintenance is further simplified with easily accessible components, making it convenient for users to clean and service the machine.

In summary, the Country Home Products C123E-CHP is engineered for efficiency, durability, and user-friendliness. Its powerful engine, dual feed system, advanced cutting technology, and safety features come together to create a reliable tool for yard maintenance. This machine not only simplifies the process of managing yard waste but also encourages sustainable practices by turning organic debris into useful mulch for gardens. Whether you're a seasoned gardener or just starting, the C123E-CHP is an invaluable addition to your outdoor arsenal.