Cooper Lighting 1001 installation instructions Programming the Easicheck Scael Interface

Page 7

2.0 Programming the EASICHECK™ SCAEL Interface.

EASICHECK™

 

Before the SCAEL Interface is connected it must be programmed in order for the EASICHECK™ Panel to recognise it as part of the system. This is done with an EASICHECK™ hand held programming unit. The programming unit has two spring loaded connections which are to be held briefly on to the SCAEL Interface ‘TELE/LOOP’ connections. See Diagram;

Programmer

SCAEL INTERFACE

 

 

 

BATTERY OUT

 

 

 

 

 

 

 

 

 

 

 

 

001

RED = +VE

BLACK = -VE

 

 

 

PROGRAM ON / OFF

SCAEL INTERFACE

LIVE SWITCH (OUT)

RED

TENS UNITS

BROWN

LIVE CHARGE (OUT)

LIVE SWITCH (IN)

LIVE CHARGE (IN)

LED

TELE/LOOP

BATTERY IN

Switch on the programming unit by pressing the top right button marked On/Off. After a few seconds the programming unit display will show the next address number due to be programmed. Hold the spring terminal against the SCAEL Interface and press Program. The programmer will show ‘Pro’ to register address acceptance and then the address number will increment by one ready for the next interface. The interface is now ready to be fitted. Repeat this until all of the interfaces have been programmed.

Note: If you are unsure as to which address the SCAEL Interface has been programmed for, then with the programmer switched off, hold the spring terminals against the SCAEL Interface and switch on the programmer. After a short delay the programmer display will flash the number of the SCAEL Interface address and then return to the next address number to be programmed.

The SCAEL unit contains a latching relay. During transit it is possible for the relay to change state, even though it is not powered up. During programming the programmer will automatically restore the relay to its correct position.

2.1 Installation of the SCAEL Interface.

The SCAEL Interface should be connected into the Luminaire by following the instructions supplied.

Attach the address label to the Luminaire. Sets of address labels are available separately.

The interface is connected in series with the existing battery pack and the LED is fitted through a hole in the gear tray to display healthy or fault status. The incoming mains live charge and live switched (maintained luminaires only) should be wired into the screw terminal block and the corresponding flying wires for each should be connected into the luminaires in the usual manner.

The interface continually monitors the battery voltage and charge current which is interrogated by the EASICHECK™ Control Panel and checked for correctness. Any luminaire found to be incorrect will have it’s Green LED switched to Amber and the Control Panel will display the Address number, location and a fault description.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Easicheck Contents EasiCheck Panel Optional AccessoriesUp/Downloading using PC Software Scael InterfaceIntroduction Specification Networking FeaturesFault Relay Loop WiringProgramming the Easicheck Scael Interface Installation of the Scael InterfaceInstallation Guide InstallationIsolators Loop CircuitsLoop connection diagrams Size Cold Resistance Single Core Go and Return Cable RequirementCable Length Voltage drop Spur CircuitLoop with spurs Loop CircuitSee example Loop 100m PanelMains Connection ‘EMERGENCY Light SYSTEM, do not Switch OFF’Battery Connection System Wiring Network Card PSU Printer ConnectionsMain Panel Operation Initial Power Up Autolearn ModeSetting The Time Setting the Time & DateSetting The Date View Group Test Test ScheduleWeekly Test Network AddressEnable/Disable Fittings Enable / Disable AllUser Menu Options Print Options Reset the PanelUser Menu Options Discharge Test VVoltage / ICurrent Display LED Test on the fittingEasicheck Control Panel User Menu Structure User menu flowchartConnection Information Site Configuration Easicheck Site Configuration Site Configuration Site Configuration Site Configuration Group Testing Project Title EasiCheck Commissioning Request FormPlease Schedule Lighting and Security

1001 specifications

Cooper Lighting Solutions, renowned for their innovative approach to lighting, has continually pushed the boundaries of design, efficiency, and functionality. The Cooper Lighting 1001 model is a prime example of their commitment to quality and advanced technology. This lighting solution stands out for its versatility, making it suitable for various applications including commercial, industrial, and residential environments.

One of the primary features of the Cooper Lighting 1001 is its energy efficiency. Equipped with LED technology, this model significantly reduces energy consumption compared to traditional lighting. This not only provides substantial cost savings over time but also contributes to a lower carbon footprint, appealing to environmentally conscious consumers and businesses alike.

The Cooper Lighting 1001 is designed to provide high lumen output while maintaining consistent color quality. This efficacy ensures that spaces are illuminated brightly and uniformly, improving visibility and enhancing safety in both commercial and industrial settings. The model's lumen maintenance is exceptional, which translates to less frequent replacements and lower maintenance costs.

In addition to impressive performance characteristics, the design of the Cooper Lighting 1001 also emphasizes adaptability. This model is available in a variety of fixture styles and finishes, allowing it to seamlessly blend into any space or architectural style. Whether installed in a warehouse, office, or retail environment, the Cooper Lighting 1001 can be customized to meet specific aesthetic and functional requirements.

Another noteworthy aspect is the advanced control technologies integrated into the Cooper Lighting 1001. The system supports compatibility with smart lighting solutions, enabling features such as dimming, occupancy sensors, and remote management. These features enhance user experience by allowing for customizable light settings and energy efficiency monitoring.

Finally, the durability of the Cooper Lighting 1001 cannot be overlooked. Constructed from high-quality materials, the fixture is designed to resist the rigors of various environments, ensuring longevity and reliability in performance.

In summary, the Cooper Lighting 1001 impresses with its energy-efficient LED technology, high lumen output, customizable design options, advanced control features, and robust construction. This model exemplifies Cooper Lighting's dedication to innovation and quality, making it a standout choice for anyone looking to upgrade their lighting solutions.
Top Page Image Contents