Cooper Lighting 1001 installation instructions Loop Circuits, Isolators

Page 9

4.0 Loop Circuits

EASICHECK™

 

The following recommendations apply specifically to EASICHECK™ loop circuits:

∀The EASICHECK™ Panel is a one loop Addressable emergency lighting test system.

∀The loop circuit has provision for a maximum of 250 SCAEL Interfaces.

∀Each SCAEL Interface has it’s own individual address which can be programmed by using the EASICHECK™ programmer.

∀The recommended cable should be used for the loop circuit. (see Cable Types section)

∀The total length of cable in the loop circuit should not exceed 2km (including all spurs)

∀Since SCAEL Interfaces receive/send signals in either direction, a complete loop or ring circuit is preferred (see diagram) so they continue to function if an open circuit occurs.

∀Isolator units can be installed at intervals throughout the circuit to prevent a short circuit fault disabling the complete loop.

∀It is important to check the voltage drop to ensure the supply to any SCAEL Interface does not fall below 15V DC.

4.1 Isolators

For spur circuits, it is preferable for circuit integrity to fit an isolator at each spur. For loop circuits it is preferable to fit an isolator every 15 to 20 fittings

+ -

Fault Indicator

TELE/LOOP

LOOP WIRING

-

+

- + - +

Note: Unlike the SCAEL Interfaces, the loop polarity must be observed.

ISOLATOR

PART No: 7466-0005

4063.100.000

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Easicheck Contents Up/Downloading using PC Software Optional AccessoriesScael Interface EasiCheck PanelIntroduction Specification Fault Relay FeaturesLoop Wiring NetworkingProgramming the Easicheck Scael Interface Installation of the Scael InterfaceInstallation Guide InstallationIsolators Loop CircuitsLoop connection diagrams Cable Length Voltage drop Cable RequirementSpur Circuit Size Cold Resistance Single Core Go and ReturnLoop with spurs Loop CircuitSee example Loop 100m PanelMains Connection ‘EMERGENCY Light SYSTEM, do not Switch OFF’Battery Connection System Wiring Network Card PSU Printer ConnectionsMain Panel Operation Initial Power Up Autolearn ModeSetting the Time & Date Setting The TimeSetting The Date Weekly Test Test ScheduleNetwork Address View Group TestEnable / Disable All Enable/Disable FittingsUser Menu Options Reset the Panel Print OptionsUser Menu Options Discharge Test VVoltage / ICurrent Display LED Test on the fittingEasicheck Control Panel User Menu Structure User menu flowchartConnection Information Site Configuration Easicheck Site Configuration Site Configuration Site Configuration Site Configuration Group Testing EasiCheck Commissioning Request Form Project TitlePlease Schedule Lighting and Security

1001 specifications

Cooper Lighting Solutions, renowned for their innovative approach to lighting, has continually pushed the boundaries of design, efficiency, and functionality. The Cooper Lighting 1001 model is a prime example of their commitment to quality and advanced technology. This lighting solution stands out for its versatility, making it suitable for various applications including commercial, industrial, and residential environments.

One of the primary features of the Cooper Lighting 1001 is its energy efficiency. Equipped with LED technology, this model significantly reduces energy consumption compared to traditional lighting. This not only provides substantial cost savings over time but also contributes to a lower carbon footprint, appealing to environmentally conscious consumers and businesses alike.

The Cooper Lighting 1001 is designed to provide high lumen output while maintaining consistent color quality. This efficacy ensures that spaces are illuminated brightly and uniformly, improving visibility and enhancing safety in both commercial and industrial settings. The model's lumen maintenance is exceptional, which translates to less frequent replacements and lower maintenance costs.

In addition to impressive performance characteristics, the design of the Cooper Lighting 1001 also emphasizes adaptability. This model is available in a variety of fixture styles and finishes, allowing it to seamlessly blend into any space or architectural style. Whether installed in a warehouse, office, or retail environment, the Cooper Lighting 1001 can be customized to meet specific aesthetic and functional requirements.

Another noteworthy aspect is the advanced control technologies integrated into the Cooper Lighting 1001. The system supports compatibility with smart lighting solutions, enabling features such as dimming, occupancy sensors, and remote management. These features enhance user experience by allowing for customizable light settings and energy efficiency monitoring.

Finally, the durability of the Cooper Lighting 1001 cannot be overlooked. Constructed from high-quality materials, the fixture is designed to resist the rigors of various environments, ensuring longevity and reliability in performance.

In summary, the Cooper Lighting 1001 impresses with its energy-efficient LED technology, high lumen output, customizable design options, advanced control features, and robust construction. This model exemplifies Cooper Lighting's dedication to innovation and quality, making it a standout choice for anyone looking to upgrade their lighting solutions.
Top Page Image Contents