Krell Industries KAV400xi manual Connection Steps, Using Balanced Connections

Page 18

Connecting the KAV–400xito Your System

USING BALANCED CONNECTIONS

Krell recommends using balanced interconnect cables. Balanced interconnect cables not only can minimize sonic loss but are also immune to induced noise, especially with installations using long cables. Balanced connections have 6 dB more gain than single- ended connections. When level matching is critical, keep this gain value in mind.

Connection

Steps

Pin assignments for the XLR connectors

Follow these steps to connect the KAV–400xi to your system.

1.Make sure all power sources and components are off before connecting inputs and outputs.

2.Neatly organize the wiring between the KAV–400xi and all sys- tem components. Separate AC wires from audio cables to prevent hum or other unwanted noises from being introduced into the system.

3.Connect the left and right loudspeaker cables to the integrated amplifier’s left and right loudspeaker output terminals (14).

The KAV–400xi uses standard binding posts for each amplifier channel. These connectors accept bare wire, pins, or spade lugs. Use the red terminal for the positive connection and the black terminal for the negative connection.

4.Connect the left and right outputs of your source components to the appropriate analog inputs (15, 16, 17) on the KAV–400xi.

The KAV–400xi is equipped with one balanced input (B-1), three single-ended inputs (S-1, S-2, or S-3), and one tape input. The B-1, S-1, S-2, and S-3 inputs can be configured for Theater Throughput. See Optional Configurations, on page 17 for information on configuring an input for Theater Throughput.

5.Use the preamp outputs (19) to connect to an additional power amplifier, for loudspeakers in another room.

6.Plug the AC cord into the IEC connector (22) on the back panel of the KAV–400xi. Plug the remaining end into the AC wall receptacle. The red stand-by LED (3) illuminates. There is no audible click or delay.

Pin 1 Shield (ground)

Pin 2 Non-inverting (hot) (0°)

Pin 3 Inverting (cold) (180°)

14

Krell KAV–400xi

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Instructions for Use Owner’s Reference Contact InformationContents Illustrations Introduction Configurations Definition of TermsOperation Krell Current Mode TechnologyUnpacking Plastic wrappingPlacement Power CordKAV-400xi Front Panel Front Panel/Remote Control Description Power AnalogMode Indicators Volume AdjustmentFunctions Remote Control Only Functions Remote Control OnlyBattery Installation and Removal PowerBal Balance Keys FunctionKAV-400xi Back Panel Back Panel Description Amplifier Channel OutputsAnalog Inputs Analog Outputs Remote Connections IEC Connector Line FuseAGC 8 Fuses Using Balanced Connections Connection StepsOperating Your KAV-400xi Amplifier OperationTape Input and Output Optional Configurations HOW to Activate AN Input for Theater ThroughputPreamplifier Output How to Troubleshoot System Noise Questions and Answers Warranty Return Authorization Procedure Power Consumption SIGNAL-TO-NOISE RatioOutput Power Remote Control

KAV400xi specifications

Krell Industries is renowned for its high-performance audio equipment, and the KAV-400xi integrated amplifier stands as a testament to the company's dedication to sound quality and cutting-edge technology. Weighing in at a hefty 65 pounds, the KAV-400xi is designed with a robust construction that not only ensures durability but also minimizes resonance, helping to deliver pure sound untainted by unwanted vibrations.

One of the standout features of the KAV-400xi is its high power output. With an impressive 200 watts per channel into 8 ohms, and even more power available when driving lower impedances, this amplifier is capable of driving a wide range of speakers with ease. This means that whether you are using a modest bookshelf speaker or a more demanding floor-standing model, the KAV-400xi can deliver a dynamic range of sound that will resonate throughout your listening space.

The KAV-400xi also integrates advanced technologies such as Krell's proprietary Current Mode Amplification. This design philosophy enables the amplifier to respond more quickly to changes in the audio signal, resulting in improved transient response and overall clarity. As a result, listeners can expect a more engaging soundstage that captures the subtle nuances of their favorite recordings.

Additionally, the KAV-400xi features a fully balanced design, minimizing the potential for noise interference and ensuring that the sound remains pure and unaffected by external factors. The inclusion of both XLR and RCA inputs allows for versatile connectivity options, accommodating a variety of source components while maintaining high signal integrity.

Another noteworthy characteristic is the integrated digital signal processing (DSP), which optimizes the audio output for different environments. This feature is invaluable for listeners who want to tailor their sound experience based on room acoustics, ensuring the best audio performance regardless of the space.

The build quality of the KAV-400xi is evident through its attention to detail, featuring a sleek front panel, a large volume control knob, and a clear display that showcases operational metrics. In addition, the amplifier is equipped with a high-quality thermal management system to maintain optimal performance without overheating, even during prolonged listening sessions.

In summary, the Krell KAV-400xi integrated amplifier exemplifies high-fidelity audio performance, combining powerful amplification, advanced technologies, and exemplary build quality. This amplifier is an exceptional choice for audiophiles seeking to enhance their sound systems and enjoy a superior listening experience. Whether used in a dedicated home theater or a multi-room audio setup, the KAV-400xi stands ready to meet the demands of discerning music lovers everywhere.
Top Page Image Contents