Krell Industries KAV400xi manual Placement, Power Cord

Page 9

Placement

AC Power Guidelines

Power Cord

Before you install the KAV–400xi into your system, review the fol- lowing guidelines to choose the location for the KAV–400xi. This will facilitate a clean, trouble-free installation. The KAV–400xi does not require any type of special rack or cabinet for installation. For the dimensions of the KAV–400xi, see Specifications, on the back cover.

Place the KAV–400xi on a firm, level surface, away from exces- sive heat, humidity, or moisture. The KAV–400xi requires at least two inches (5 cm) of clearance on each side and at least two inch- es (5 cm) of clearance above and below the component to provide adequate ventilation. Installations inside cabinetry may need extra ventilation.

The KAV–400xi is not hum-sensitive. Other components may be placed on or around the KAV–400xi (make sure ventilation grids remain unobstructed).

Place the amplifier as close to the loudspeakers as possible and keep loudspeaker cable lengths to a minimum. Loudspeaker cable adds impedance to the load the amplifier must drive, regardless of the cable’s gauge. All Krell amplifiers drive the lowest impedances with ease, but long loudspeaker cables reduce the maximum power that can be delivered to the loudspeakers.

The KAV–400xi has superb regulation and does not require a ded- icated AC circuit. Avoid connections through extension cords or multiple AC adapters. High quality 15 amp grounded AC strips are acceptable. High quality AC line conditioners or filters may be used if they are grounded and meet or exceed the unit’s maximum power consumption of 1800 Watts.

The KAV–400xi should be operated only with the power cord supplied. Please contact your authorized Krell dealer, distributor, or Krell before using any devices designed to alter or stabilize the AC power for the KAV–400xi.

Krell KAV–400xi

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Instructions for Use Owner’s Reference Information ContactContents Illustrations Introduction Configurations Definition of TermsOperation Technology Krell Current ModePlastic wrapping UnpackingPower Cord PlacementKAV-400xi Front Panel Power Analog Front Panel/Remote Control DescriptionMode Indicators Volume AdjustmentFunctions Battery Installation and Removal Remote Control OnlyRemote Control Only Functions PowerFunction Bal Balance KeysKAV-400xi Back Panel Back Panel Description Amplifier Channel OutputsAnalog Inputs Analog Outputs Remote Connections IEC Connector Line FuseAGC 8 Fuses Connection Steps Using Balanced ConnectionsAmplifier Operation Operating Your KAV-400xiTape Input and Output HOW to Activate AN Input for Theater Throughput Optional ConfigurationsPreamplifier Output How to Troubleshoot System Noise Questions and Answers Warranty Return Authorization Procedure Output Power SIGNAL-TO-NOISE RatioPower Consumption Remote Control

KAV400xi specifications

Krell Industries is renowned for its high-performance audio equipment, and the KAV-400xi integrated amplifier stands as a testament to the company's dedication to sound quality and cutting-edge technology. Weighing in at a hefty 65 pounds, the KAV-400xi is designed with a robust construction that not only ensures durability but also minimizes resonance, helping to deliver pure sound untainted by unwanted vibrations.

One of the standout features of the KAV-400xi is its high power output. With an impressive 200 watts per channel into 8 ohms, and even more power available when driving lower impedances, this amplifier is capable of driving a wide range of speakers with ease. This means that whether you are using a modest bookshelf speaker or a more demanding floor-standing model, the KAV-400xi can deliver a dynamic range of sound that will resonate throughout your listening space.

The KAV-400xi also integrates advanced technologies such as Krell's proprietary Current Mode Amplification. This design philosophy enables the amplifier to respond more quickly to changes in the audio signal, resulting in improved transient response and overall clarity. As a result, listeners can expect a more engaging soundstage that captures the subtle nuances of their favorite recordings.

Additionally, the KAV-400xi features a fully balanced design, minimizing the potential for noise interference and ensuring that the sound remains pure and unaffected by external factors. The inclusion of both XLR and RCA inputs allows for versatile connectivity options, accommodating a variety of source components while maintaining high signal integrity.

Another noteworthy characteristic is the integrated digital signal processing (DSP), which optimizes the audio output for different environments. This feature is invaluable for listeners who want to tailor their sound experience based on room acoustics, ensuring the best audio performance regardless of the space.

The build quality of the KAV-400xi is evident through its attention to detail, featuring a sleek front panel, a large volume control knob, and a clear display that showcases operational metrics. In addition, the amplifier is equipped with a high-quality thermal management system to maintain optimal performance without overheating, even during prolonged listening sessions.

In summary, the Krell KAV-400xi integrated amplifier exemplifies high-fidelity audio performance, combining powerful amplification, advanced technologies, and exemplary build quality. This amplifier is an exceptional choice for audiophiles seeking to enhance their sound systems and enjoy a superior listening experience. Whether used in a dedicated home theater or a multi-room audio setup, the KAV-400xi stands ready to meet the demands of discerning music lovers everywhere.
Top Page Image Contents