Assembly
Warning! Unplug the tool before changing grinding wheels, or before making any adjustments to the tool.
Installation
1.Install the Sharpener to a workbench before use.
FIGURE 1
Lock Wheel (18) | 1/4” Hole | |
with Bolt | ||
|
1.When installing the sharpener on a workbench, make sure that the Lock Wheel (18) is accessible, as shown in the mounting picture in FIGURE 1.
FIGURE 2
Base (17)
2.Bolt (bolts not included) the unit directly to the workbench through the two 1/4” holes on the Base (17). The workbench must have a solid surface capable of supporting the weight of this product, the workpiece and assorted tools. See FIGURE 2.
SKU 93213 | For technical questions, please call | Page 8 |