Operating Instructions, Tool Set Up | Chicago Electric 43150

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Tool Set Up

To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool off and remove the batteries before adjusting tool or installing accessories.

Lock Nut (31)

Threaded Lock Ring (29)

Upper Leg (25)

Tapered Bushing (30)

Figure 2

Note: When adjusting the length of the Metal Detector, be careful to keep the plastic Tapered Bushing (30) in place with the smaller end toward the smaller end of the Lock Nut (31).

1.To attach the two legs, slide the Threaded Lock Ring (29) over the end of the Upper Leg (25), making sure that the tabs inside the Lock Ring lock into the cut-outs at the end of the leg. Insert the tapered end of the Tapered Bushing (30) into the Lock Nut (31) and lightly thread the Nut over the Lock Ring (29). Slide the Lower Leg (26) into the Lock Nut. To take the slack off the cord, rotate the Lower Leg, enabling the cord to wind

around the two Legs. Rotate the Nut counterclockwise to lock the Legs.

2.To adjust the length of the Legs, turn the Lock Nut in a clockwise direction, slide the Lower Leg to the desired extension length and turn the Nut counterclockwise to secure the Legs together.

3.To adjust the angle of the Search Coil, loosen the Adjusting Knobs (28, 32) and tilt it. Position the Search Coil so that it is parallel to the ground when holding the unit by the Handle (3, 4).

4.If needed, re-adjust the length of the Metal Detector after adjusting the position of the Search Coil.

Batteries

1.Make sure the On/Off/Volume control is set to OFF. Slide the Battery Cover

(20)off of the back of the Control Box and insert six AA batteries (sold separately), aligning polarities as indicated. Replace the Battery Cover.

Note: Use only fresh batteries of the required size and type. Do not mix old and new batteries, different types (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

Always remove old or weak batteries. Batteries can leak chemicals that can destroy electric parts.

If you do not plan to use the detector for a week or more, remove the batteries.

Dispose of spent batteries according to your local, state and federal regulations.

SKU 43150

For technical questions, please call 1-800-444-3353.

Page 6

43150 specifications

The Chicago Electric 43150 is a versatile and powerful electric planer designed to meet the needs of both woodworking enthusiasts and professionals. Known for its durability and efficiency, this tool is an excellent addition to any workshop, making it an invaluable asset for those who work with wood.

One of the standout features of the Chicago Electric 43150 is its robust motor. With a powerful 6-amp motor, this planer can deliver speeds of up to 25,000 RPM, enabling users to tackle even the toughest materials effortlessly. This high-speed capability provides a smooth and clean finish on a variety of wood types, allowing for enhanced accuracy in woodworking projects.

The Chicago Electric 43150 also boasts a generous planing width of 3-1/4 inches, making it suitable for a variety of applications, from leveling rough lumber to creating smooth surfaces on boards. Additionally, the depth adjustment feature allows users to easily set the desired thickness for their cuts, with a maximum depth of 1/8 inch, providing an added layer of customization for different project requirements.

Comfort and usability are also key aspects of the design of the Chicago Electric 43150. It comes equipped with a comfortable grip handle, which helps reduce fatigue during extended use. The tool's lightweight construction further enhances its maneuverability, making it easy to handle and control for both intricate work and larger tasks.

Another important characteristic of the Chicago Electric 43150 is its built-in dust port. This feature allows for efficient dust collection, helping to keep the work area clean while also improving visibility during use. By connecting the planer to a vacuum or dust collection system, users can achieve a cleaner workspace and reduce the risk of respiratory hazards associated with wood dust.

In terms of safety, the Chicago Electric 43150 is designed with several safety features, including a safety lock switch that prevents accidental start-ups. This thoughtful design consideration ensures that users can work confidently, knowing that their tool is equipped to handle safe operation.

Overall, the Chicago Electric 43150 stands out as a reliable and efficient electric planer, offering users a perfect balance of power, performance, and safety. Whether tackling home improvement projects or professional woodworking tasks, this planer is designed to deliver excellent results and enhance productivity in any woodworking environment. Its compatibility with a range of techniques and applications makes it a must-have for anyone serious about woodworking.