Replacing Gobos
1. Unscrew the 4 screws (S1) to detach the top cover.
S1
2.For the rotating gobo wheel, it is a simple matter of removing the
| 3. | Then, using a small prying tool, remove the gobo tension ring and remove from the gobo aperture. |
| 4. | Push the gobo with your finger from the back side following the same direction that the tension |
|
| ring was removed. |
Caution! | Tension ring could pop out abruptly and fall inside the fixture. Please use caution when | |
| removing and if necessary use both hands. | |
Note! | Replacing the gobos on the static gobo wheel is achieved using the same method as the | |
| rotating gobo wheel. However, the gobo wheel is not | |
Legend™ 550 User Manual | 11 | 1/11/2010 11:36 AM |