Before YOU Begin, What is Included, AC Power

1.BEFORE YOU BEGIN

What is Included

1 x Vue™ 6.1

Power Cord

Warranty Card

User Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

AC Power

This fixture has an auto-switching power supply that can accommodate a wide range of input voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage you are applying is within the range of accepted voltages. This fixture will accommodate between 100V and 240V AC. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch.

Safety Instructions

Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product.

•Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.

•Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.

•This product is intended for indoor use only!

•To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.

•The unit must be installed in a location with adequate ventilation, at least 50cm (20in) from adjacent surfaces. Be sure that no ventilation slots are blocked.

•Always disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.

•Secure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying handles.

•Maximum ambient temperature (Ta) is 104°F (40°C). Do not operate fixture at temperatures higher than this.

•In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.

•Don’t connect the device to a dimmer pack.

•Make sure the power cord is never crimped or damaged.

•Never disconnect the power cord by pulling or tugging on the cord.

•Avoid direct eye exposure to the light source while it is on.

•Do not link more than 20 @120V and 35@230V.

Caution!	There are no user serviceable parts inside the unit. Do not open the housing or
	attempt any repairs yourself. In the unlikely event your unit may require service,
	contact CHAUVET® at: 954-929-1115.

Vue™ 6.1 User Manual

Rev. 2

6.1 specifications

The Chauvet 6.1 is a sophisticated and versatile lighting fixture designed for a range of applications, including concerts, theater productions, and events. This innovative lighting solution combines advanced technology with user-friendly features, making it an ideal choice for lighting professionals and enthusiasts alike.

One of the standout features of the Chauvet 6.1 is its six-channel DMX control capability, which allows for precise manipulation of lighting effects. This flexibility in control enables users to create dynamic lighting scenes and effects tailored to specific performances or atmospheres. The fixture supports various operation modes, including sound-activated, auto, and DMX, enabling seamless integration into any lighting setup or performance.

The Chauvet 6.1 utilizes LED technology, which not only provides vibrant colors but also ensures energy efficiency and longevity. The high-output LED bulbs deliver brilliant light output that can fill large spaces while generating minimal heat. This reduces cooling requirements and ensures that the fixture remains safe and operable during extended use.

Another notable characteristic of the Chauvet 6.1 is its built-in color mixing capabilities. Users can combine various colors to create custom hues, enhancing the overall aesthetic of light displays. This feature, combined with smooth dimming and strobe capabilities, allows for creativity in lighting design at any event.

Portability is a key aspect of the Chauvet 6.1, as it is lightweight and compact, making it easy to transport and install. This is especially beneficial for touring artists and event planners who require reliable and transportable lighting solutions. Additionally, the fixture's durable construction means it can withstand the rigors of frequent use and travel.

In conclusion, the Chauvet 6.1 is a highly functional lighting fixture that excels in versatility, efficiency, and ease of use. Its advanced DMX control, stunning LED output, and customizable color mixing capabilities make it a valuable tool for achieving exceptional lighting designs. Whether for a stage performance, DJ set, or special event, the Chauvet 6.1 offers the features and technologies necessary to elevate any lighting experience.