Chauvet 2100 user manual Technical Information, Fogger Maintenance Storage

Page 11

5.TECHNICAL INFORMATION

Fogger Maintenance

Storage

Do not allow the fog machine to become contaminated. After every 40 hours of continuous operation, CHAUVET® recommends running a cleaning solution composed of 80% distilled water and 20% distilled vinegar through the system to prevent the accumulation of particulate matter in the heating element.

The recommended cleaning procedure is as follows:

1.Empty all fog liquid from the machine.

2.Add cleaning solution to tank.

3.Plug unit in and allow it to warm up.

4.Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the pump to run dry.

5.Cleaning is now complete. Refill with fog liquid. Run the machine briefly to clear any cleaning solution from the pump and heater.

Before storing this product, run distilled water (not tap water) through the system as described in the cleaning method above. This will help to avoid any particles condensing inside the pump or heater.

It is strongly recommended to test-run the machine on a monthly basis in order to achieve its best fogging condition.

FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Arena™ 2100 Flex. Make sure you use FCQ regularly to increase the life of your fogger.

Arena™ 2100 Flex User Manual (Rev. 7)

Page 11 of 13

Image 11
Contents Page Table of Contents Enter What Is Included Claims Text Conventions Symbols DisclaimerBefore YOU Begin Product at a GlanceSafety Notes Product Overview IntroductionProduct Dimensions Resetting the Breaker SetupAC Power Rigging MountingOrientation Control Panel Operation Configuration DMXConfiguration Standalone OperationMaster unit Slave unitsTechnical Information Fogger Maintenance StorageOrdering Technical SpecificationsDMX Chauvet Contact Us Returning Products to