Bush Hog 5145 manual Dismounting Loader and Mounting Loader to Tractor

Page 39

ASSEMBLY

Dismounting Loader and Mounting Loader to Tractor

Dismounting Loader

To avoid injury during installation of loader:

•Place loader bucket against barrier to restrict forward movement of loader.

•Do not permit bystanders within 15 feet of loader.

Loader must be equipped with a bucket or other optional attachment to dismount from tractor.

When dismounting loader, maintain clearance between loader side frames and tractor hood and front axle.

It is important not to put excessive weight on parking stands with lift cylinder retraction. Damage may result.

1.Locate tractor and loader on firm level ground.

2.With bucket raised above ground, tilt down approximately 30 degrees from level.

3.Lower boom by retracting lift cylinders to lift tractor front end (tires can be off ground).

4.Stop engine. Allow tractor front end to lower by relaxing ONLY lift cylinders with control lever. This will remove pressure on hitch pins (See Image

Note: Do not relax bucket cylinders.

5.Set parking brake. Rotate parking stands from storage position to operation position by

removing linch pins and hitch pins. Reinstall hitch pin and linch pin when parking stands are in operation position. (See Figure Asm-L-0040).

6.Remove linch pins and 1-1/4” hitch pins from loader upright.

7.Start tractor engine and release brakes. Retract bucket cylinders to allow parking stands to contact ground.

ASSEMBLY

5145 01/11

Assembly Section 3-5

© 2011 Alamo Group Inc.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 5145 To the Owner/Operator/Dealer Table of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety5145 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 Safety Safety 5145 01/11 Safety Section SL-33 SPU-2 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices 5145 01/11 Safety Section See Your Bush HOG Dealer Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesDecal Location QTY Level Description Model Name Decal DescriptionD469 5145 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Instructions Assembly5145 01/11 Assembly Section Proper Rear Ballasting and Wheel Spacing Dismounting Loader Dismounting Loader and Mounting Loader to TractorMounting Loader Attaching Pin on Bucket Mounting Attachment to Loader Mounting and Dismounting AttachmentAssembling Quick Attach Device Detaching Quick Attach DeviceInstalling Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Operation Section Operation Standard Equipment and Specifications Operator Requirements Operation Personal Protective Equipment PPE Tractor Requirements Rops and Seat BeltTractor Lighting and SMV Emblem Tractor Ballast Getting On and Off the TractorDismounting the Tractor Boarding the TractorStarting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/ServiceMount Assembly OPS-L-0007B Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Implement Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderOperation Lifting the Load Carrying the Load Lowering the Bucket Dumping the BucketOperating with Float Control Loading from a Bank Operation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Loader Storage Transporting the Tractor and ImplementShutting Down the Implement Operation Transporting on Public Roadways Operation Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuidePage Maintenance Section Maintenance 5145 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Lift and Bucket Cylinder Disassembly Cylinder ServiceLift and Bucket Cylinder Reassembly Adjusting Bucket Level IndicatorStorage Maintenance Proper Torque for Fasteners Maintenance Maintenance Page Limited Warranty To the OWNER/OPERATOR/DEALER SOM-01/11 Printed U.S.A

5145 specifications

The Bush Hog 5145 is a versatile and robust rotary cutter designed for heavy-duty use, perfect for maintaining large properties, farms, and fields. This model stands out in the Bush Hog lineup due to its excellent performance, durability, and user-friendly features, making it a popular choice among landowners and landscapers alike.

One of the standout features of the Bush Hog 5145 is its cutting width, which spans an impressive 15 feet. This allows for efficient coverage of large areas in a shorter amount of time, significantly boosting productivity. The cutter is equipped with high-strength steel blades that can easily manage thick brush, tall grass, and tough vegetation, ensuring clean and effective cutting.

The 5145 utilizes a heavy-duty construction, with a robust gearbox and substantial frame designed to withstand rigorous use in challenging environments. This ensures longevity and reliability, even when tackling the toughest vegetation. The heavy-duty drive system provides consistent power transfer, allowing users to tackle various terrains and conditions without compromising performance.

A key technological feature of the Bush Hog 5145 is its ability to be easily adaptable to different tractors, thanks to its adjustable hitch. This makes it compatible with a wide range of vehicles, enhancing its versatility. Additionally, the cutter features an innovative blade brake system that improves safety by quickly stopping the blades when needed, which is particularly useful when transitioning between mowing and transport modes.

The Bush Hog 5145 also emphasizes operator comfort and ease of use. Its ergonomic design allows for intuitive operation, reducing the learning curve for new users. The cutter's lightweight design, combined with its robust construction, enables easy maneuverability while maintaining stability during operation.

Another noteworthy characteristic of the 5145 is its maintenance-friendly design. The cutter is engineered for easy access to vital components, making routine maintenance and inspections straightforward. This contributes to reduced downtime, ensuring that the unit remains operational throughout the cutting season.

In summary, the Bush Hog 5145 rotary cutter blends power, efficiency, and user-centric design, making it a top choice for anyone in need of a reliable solution for large-scale land management. With its impressive cutting width, robust construction, and advanced safety features, it delivers the performance required to keep landscapes in pristine condition.
Top Page Image Contents