Bush Hog 2547 manual Standard Equipment and Specifications

OPERATION

1. Standard Equipment and Specifications

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with 72” material bucket operated with an average tractor hydraulic system of 10.8 GPM with engine operating at 1950 RPM and control valve relief setting of 2750 PSI.

Horsepower Range		30-90 HP
System pressure/flow rate		2750 PSI/ 10.8 GPM
Lift Capacity to maximum height at pivot pin		2720 lbs.
Breakout force at pivot pin		6530 lbs.
Rollback force at ground line		2600 lbs.
Total weight with bucket (approx.)		1550 lbs.
Raising time to full height		6.83 seconds
Lower time		4.88 seconds
Attachment dump time (regen.)		4.92 (3.40) seconds
Attachment rollback time		3.65 seconds
Hydraulic system flow		10.8 GPM
System pressure at rated flow		2750 PSI
(A)	Maximum Lift Height at Pivot Pin	119”
(B)	Clearance with Bucket Dumped	93”
(C)	Reach at Maximum Height	33”
(D)	Maximum Dump Angle	44°
(E)	Reach with Attachment on Ground	69”
(F)	Attachment Rollback Angle	23°
(G)	Digging Depth	2”
(H)	Overall Height in Carry Position	65”

(Manufacturers estimated specifications and design subject to change without notice.)

2547 01/11 Operation Section 4-3

© 2011 Alamo Group Inc.

OPERATION