Bush Hog GT 48 manual Base Unit Assembly, Base Unit Cuff Weldment Height Adjustment Handle

Page 17

AFTER COMPLETING ANY ASSEMBLY STEP, THOROUGHLY READ THE NEXT STEP IN THE ASSEMBLY INSTRUCTIONS BEFORE PROCEEDING WITH THAT STEP.

11.After completing assembly, thoroughly inspect the machine to be sure that all nuts, bolts, hydraulic fittings or any other fastened assemblies have been thogoughtly tightened.

12.After completing assembly, be sure that all safety locking devices or guards are in place.

13.Before operating the machine, thoroughly read the operation section of this manual.

14.Before operating, read the maintenance section of this manual to be sure that any parts requiring lubrication such as engines are full to avoid any possible damage.

BEFORE OPERATING THE EQUIPMENT, IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER ASSEMBLY OR OPERATION, CONTACT YOUR AUTHORIZED BUSH HOG DEALER OR REPRESENTATIVE.

4-1 BASE UNIT ASSEMBLY

A. Mount spindle weldment to axle weldment using four 1/2 x 1-1/2” bolts and lock nuts. (Figure 4- 1)

B. Mount axle assembly to frame using two 1/2 x 1-1/4” bolts and locknuts (Figure 4-1). Nuts should be snug, not tight, to allow axle to pivot.

C. Assemble wheels onto axles in the following order: Two 3/4” flatwashers, wheel, one 3/4” flat- washer, and cotter pin.

D. Insert thread end of clevis rod into end of cuff weldment opposite bushing. Place two 1/2” flatwash-

ers on clevis rod. Thread handle onto rod.

E. Fasten height adjustment assembly to axle and deck using two 1/2 x 2-1/2” bolts, bushings, flatwash- ers, lockwashers and nuts.

F. Mount tongue to front of deck using two 1/2 x 1- 1/4” bolts and locknuts. Nuts should be snug, not tight, to allow tongue to pivot.

G. Attach leveling rod to tongue and axle using two 1/2 x 1-1/4” bolts and locknuts. Nuts should be snug, not tight, to allow axle and tongue to pivot. If vehicle to be used for towing cutter is present, adjust the lev- eling bar during installation per paragraph 2-2.

Figure 4-1 Base Unit

Cuff Weldment

Height Adjustment Handle

1/2 x 1-1/2” Bolts

1/2 x 2-1/2” Bolt

 

 

 

 

 

Bushing

 

 

1/2 x 1-1/4” Bolts

1/2 x 2-1/2” Bolt

 

Axle Weldment

Clevis Rod

Bushing

Spindle

 

 

 

Weldment

1/2 x 1-1/4” Bolt

1/2 x 1-1/4” Bolt

1/2 x 1-1/2”

Bolts

Tongue

Leveling Rod

1/2 x 1-1/4” Bolt

Wheel

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Bush HOG Congratulations Operator’s Manual Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List Safety Alert Symbol Important Safety Precautions Page Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsDescription Section Introduction and DescriptionIntroduction Cutting Height Adjustment General SafetySection Operation Attaching to Towing VehicleEngine Starting Electric Start Control BOX MountingEngine Shutdown CuttingMaintenance Check List Section MaintenanceBelt Adjustment Replacing BeltTroubleshooting HUB Bearing ReplacementBlade Replacement General Troubleshooting Section Dealer AssemblyBase Unit Cuff Weldment Height Adjustment Handle Base Unit AssemblyElectric Start Connection to Engine Wiring DiagramOptional Rear Roller Optional Front RollerOptional Bumper Guard Optional Offset TongueSafety Decals American Torque SpecificationsBush HOG, L.L.C

GT 48 specifications

The Bush Hog GT 48 is a highly regarded piece of equipment in the landscaping and agricultural sectors, known for its robust performance and efficiency. Designed with the user in mind, this rotary mower is ideal for maintaining pastures, fields, and large gardens. Its impressive features make it a popular choice among both professionals and hobbyists.

One of the main characteristics of the Bush Hog GT 48 is its cutting width of 48 inches. This size strikes an excellent balance between maneuverability and coverage. The unit's heavy-duty construction ensures durability, allowing it to withstand the rigors of demanding mowing tasks. The frame is built from high-strength materials, contributing to its longevity and reliability.

The GT 48 features an adjustable cutting height, enabling users to customize their mowing experience based on the specific needs of their lawn or pasture. The height adjustment is user-friendly, allowing for quick changes without the use of additional tools. This feature ensures that the mower can tackle various grass heights efficiently.

Equipped with a powerful rotary cutting system, the Bush Hog GT 48 delivers a clean and precise cut. Its sharp blades are engineered to provide superior performance, reducing clumping and ensuring an even finish. The mower's design helps in dispersing the grass clippings evenly, promoting healthy lawn growth.

Another significant aspect of the GT 48 is its compatibility with a range of tractors. It is designed to work seamlessly with various models, making it a versatile choice for users with different equipment. This adaptability is further enhanced by its three-point hitch system, which facilitates easy attachment and detachment from the tractor.

Safety features are also a highlight of the Bush Hog GT 48. The mower comes equipped with a shielded design to protect users from flying debris, ensuring a safer mowing experience. The low center of gravity provides stability, reducing the risk of tipping during operation.

In terms of maintenance, the Bush Hog GT 48 is relatively easy to care for. Regular checks on the blades and lubrication of moving parts help prolong its life and efficiency. The unit's straightforward design allows users to complete maintenance tasks with minimal hassle.

Overall, the Bush Hog GT 48 stands out for its blend of power, versatility, and ease of use. Its advanced features make it a solid investment for anyone looking to efficiently manage their mowing needs. Whether for professional or personal use, this mower is designed to deliver results that meet and exceed expectations.
Top Page Image Contents