Bush Hog 2347 QT manual Dealer Preparation Check List

Page 5

DEALER PREPARATION CHECK LIST

2347 QT LOADER

BEFORE DELIVERING MACHINE - The following check list should be completed. Use the Operator’s Manual as a guide.

oMachine properly assembled.

oAll safety decals readable. (See decal page)

oAll bolts tightened to torque specifications given in torque chart.

oMachine operates properly.

oCustomer has appropriate mounting kit for his tractor and loader.

oCustomer has appropriate attachments for loader operations. ( Buckets for lifting loose materials; bale spear for lifting round bales; fork lift for lifting palletized material)

CAUTION

IT IS RECOMMENDED THAT TRACTOR BE

EQUIPPED WITH ROLLOVER PROTECTIVE SYS-

TEM (ROPS) AND SEAT BELT BE USED FOR ALL

LOADER OPERATIONS.

oOperators manual has been delivered to owner and he has been instructed on the safe and proper use of the front end loader.

Dealer’s Signature

THIS CHECK LIST TO REMAIN IN OPERATOR’S MANUAL

It is the responsibility of the dealer to complete the procedures listed

above before delivery of this implement to the customer.

3

Image 5

Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyDealer Preparation Check List Loader Important Safety PrecautionsTractor Operating the Loader Safety PrecautionsEmployee Tractor Operating Instructions EMPLOYERS, Employees and OperationsIntroduction Section Introduction and DescriptionTechnical Specifications Mounting Loader Section Loader Mounting and DismountingPreparing Tractor Tighten Nut To 85 ft./lbs Dismounting Loader Operation General SafetySection Operating Instructions Lifting the Load Filling the BucketDumping the Bucket Carrying the LoadLowering the Bucket Not this Do this Dump Lower Leverrollback ControlsraiseFloat Surface Material Loading from a Bank Operating with Float ControlFloat 3RD CUT , 4TH CUT, ETC Peeling and ScrapingLoading LOW Trucks or Spreaders from a Pile BackfillingHandling Large Heavy Objects Bale Spear OperationSoil Pile Transporting Fork Lift OperationQuick Hitch Operation Maintenance Check List Section MaintenanceHydraulic System Pressure Requirements Before Each USETroubleshooting Procedures Problem Possible Cause Remedy TroubleshootingSection AssemblyMainframe Assembly Parking Stands Installed Optional Hydraulic Valve Stand Assembly Figure Hose Color Codes Optional Hydraulic Valve Plumbing InstructionsBasic Power Beyond Plumbing Instructions Tine Teeth Fork Lift OptionBale Spear Option Safety Decals American Torque Specifications