Bush Hog TDR-11 manual Blade Replacement, Troubleshooting

Page 15

4-5 BLADE REPLACEMENT

CAUTION

WEAR HEAVY WORK GLOVES TO PRO- TECT HANDS FROM SHARP EDGES. WHEN TURNING BLADES, BE AWARE OF OPPOSITE BLADE APPROACHING.

A. Raise cutter using tractor hydraulic system and use transport locks before changing blades.

B. Turn off tractor,set parking brake and remove key.

C. Remove bolt and Belleville washer securing bottom blade to spindle. Remove blade. Shaft wash- er will come off with the blade.

D. Install the blade washer over the spindle shaft. Install the blade and torque the 1/2” - 20UNF

Gr. 8 bolt to 76 ft./lbs. Note: The concave side of the belleville washer must be toward the blades. Do not substitute with a flat washer.

4-6 TROUBLESHOOTING

Troubleshooting procedures are listed in Table 4-1 below. If the problem cannot be solved or replacement parts are necessary, contact your authorized Bush Hog dealer. Please have ready your machine name, model num- ber, serial number, purchase date and exact cause or description of problem.

 

Table 4-1 Troubleshooting

 

 

 

 

PROBLEM

PROBABLE CAUSE

REMEDY

 

 

 

 

 

 

 

Uneven Cut

Cutter not level side to side

See SECTION III.

 

 

 

or front to rear.

 

 

 

 

Belt slipping.

Adjust belt per paragraph 4-3.

 

 

 

Worn or bent blade(s).

Replace blade(s).

 

 

 

 

 

 

 

Streaking or Windrowing

Possible build-up of

Clean cutter.

 

 

 

material under cutter.

 

 

 

 

Cutter not level.

See SECTION III.

 

 

 

Worn blades.

Replace blades.

 

 

 

Belt slipping.

Adjust belt per paragraph 4-3.

 

 

 

Mowing across slopes

Mow up and down slopes

 

 

 

 

 

 

 

Noisy Cutter

Loose components.

Check all bolts for tightness.

 

 

 

Low oil in gearbox.

Check oil per paragraph 4-2.

 

 

 

 

 

 

 

Rapid Blade Wear

Blade contacting

Adjust cutting height to

 

 

(cutting edge)

ground.

eliminate ground contact.

 

 

 

 

 

 

 

Cutter Vibrating

Cutter not being operated

Set tractor throttle for

 

 

 

at rated PTO speed.

proper PTO speed.

 

 

 

Blade(s) bent.

Replace blades.

 

 

 

Foreign object wrapped

Remove object.

 

 

 

around spindle or blade.

 

 

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyTri-Deck Finishing Mower Safety Alert Symbol Important Safety Precautions Employee Tractor Operating Instructions EMPLOYERS, Employees and OperationsIntroduction Section Introduction and DescriptionAttaching to Tractor Section Preparation for USEGeneral Safety Cutting Height AdjustmentSection Operating Instructions Transporting OperationMaintenance Check List Section MaintenanceSpindle Belt Replacement Spindle Belt AdjustmentTroubleshooting Blade Replacement83343 Safety DecalsDecals American Torque SpecificationsBush HOG, L.L.C

TDR-11 specifications

The Bush Hog TDR-11 is a powerful and versatile implement designed for agricultural and landscaping applications. This robust rotary cutter is engineered to handle a range of demanding tasks, making it an essential tool for farmers, property owners, and landscapers alike. The TDR-11 is primarily known for its efficient cutting capabilities and durability, which are paramount for maintaining fields, pastures, and overgrown areas.

One of the standout features of the Bush Hog TDR-11 is its cutting width of 11 feet, allowing operators to cover large areas in a single pass. This efficiency significantly reduces the time required to clear land or manage vegetation, making it ideal for those with extensive properties. The cutter is designed to handle tough materials, including dense brush and heavy grasses, thanks to its impressive cutting performance.

In terms of construction, the TDR-11 boasts a heavy-duty design. The frame is built from high-strength steel, ensuring durability and long-lasting performance even under the most challenging conditions. The reinforced deck contributes to its ability to resist wear and tear, providing reliability throughout the years.

Another key characteristic of the Bush Hog TDR-11 is its Triple Blade design. These blades are crafted to provide a clean and even cut while minimizing debris and mess. The adjustable blade height empowers the operator to adapt the cutting height to their specific requirements, ensuring optimal results for various applications.

The TDR-11 features a slip clutch driveline, a technology that protects the machine from shock loads and enhances its longevity. This feature allows the implement to operate smoothly while preventing potential damage from unexpected obstacles encountered during operation.

Moreover, the Bush Hog TDR-11 is designed for easy attachment and detachment, making it user-friendly and efficient for operators who may need to switch between different implements frequently. The universal mounting system ensures compatibility with a wide range of tractors, enhancing versatility.

Overall, the Bush Hog TDR-11 is a testament to engineering excellence in rotary cutters, combining robust construction, advanced technology, and practical features. Its capacity to handle various cutting tasks while maintaining ease of use solidifies its position as a reliable choice for those in need of an efficient land management solution. Whether for agricultural purposes or landscaping, the TDR-11 proves to be a valuable asset, delivering performance that meets and exceeds expectations.
Top Page Image Contents