Bush Hog TDR-11 Table of Contents, Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty

TDR-11 Finishing Mower

TABLE OF CONTENTS

SECTION/PARA			PAGE		SECTION/PARA		PAGE
	Warranty			2	3-2 Cutting Height Adjustment		...............9
	Dealer Preparation Check List			3	3-3 Operation		10
	Safety Precautions			4	3-4	Transporting	10
	Federal Laws and Regulations			6	IV.MAINTENANCE		11
I. INTRODUCTION & DESCRIPTION				......7	4-1 Maintenance Check List		11
1-1		Introduction		7	4-2 Lubrication		11
1-2		Description		7
					4-3 Spindle Belt Adjustment		12
II. PREPARATION FOR USE				8
					4-4	Spindle Belt Replacement	12
2-1		Attaching To Tractor		8	4-5	Blade Replacement	13
III.OPERATING INSTRUCTIONS				9	4-6	Troubleshooting	13
						Safety Decals	14
3-1		General Safety		9
						Torque Specifications	16

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or exces- sive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made with- in forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the product for the purpose of performing a warranty obligation or inspection.

1