Towing | Briggs & Stratton LS401221, LS401216, LS401213, LS401224

STEP 3: The engine maximum governed speed is preset at the factory at 3600 RPM no load speed. When splitting wood, the throttle should be set at the maximum setting to develop the horsepower required for the pump.

STEP 4: TOWING

The log splitter is equipped with pneumatic tires, a Class I coupler (2 in. diameter ball required) and safety chains. Before towing,

the safety chains must be secured to the hitch or bumper of the vehicle. Local regulations should be checked regarding licensing, lights, towing, etc. See also Towing Safety on page 6 of this manual.

STEP 5: OPERATION

WARNING: See safety information related to operation of the log splitter on page 3 and 4 of this manual. Make sure that you have the recommended personal protective equipment described on page 1.

1)Set up the log splitter in a clear, level area and block the wheels. Make sure that the suction port on the tanks is always on the lower side of the log splitter.

2)Place a log on the beam against the foot plate. Make sure that the log is securely on the foot plate and up against the beam.

3)Depress the valve handle so that the cylinder will drive the wedge into the log. Extend the cylinder until the log splits or to the end of its stroke. If the log has not completely split after the cylinder has reached the end of its extension, retract the cylinder. IMPORTANT: Leaving the valve in the “actuate” position at the end of the stroke may damage the pump. Always use extra care when splitting logs with unsquare ends.

NOTE: For operation in wooded areas, obtain a spark arrestor for the exhaust system. See the engine operating and maintenance manual and check with your authorized Briggs & Stratton service center. See also Fire Prevention on page 5 and 6 of this manual.

IMPORTANT:	TO EXTEND THE LIFE OF THE HYDRAULIC CYLINDER, AVOID “BOTTOMING OUT” WEDGE PLATE TO THE FOOT
	PIECE. TO CONFORM WITH INDUSTRY SAFETY RECOMMENDATIONS, THE WEDGE STOPS 2 INCHES FROM
	THE END OF THE STROKE.

MAINTENANCE

1)Consult the operating and maintenance instructions of the engine manufacturer for engine care and maintenance.

2)Always check the oil level of the hydraulic reservoir before operation. Operating the log splitter without an adequate oil supply will cause severe damage to the pump.

3)Change the oil filter after the first 25 hours of operation. Thereafter, change the oil filter every 100 hours or seasonally, whichever comes first.

4)If the wedge becomes dull or nicked, it can be removed and sharpened. Remove the 1/2 in. diameter bolt that connects the wedge to the cylinder. The hose from the valve may need to be removed. While the log splitter is in the horizontal position, loosen the hose clamp and disconnect the hose from the valve. Carefully lift the cylinder to allow the wedge to slide forward. The wedge can now be lifted off and sharpened.

5)Clean the breather cap after 25 hours of operation. Clean it more often when operated in dusty conditions. To clean, remove the breather from the tank and flush with kerosene or liquid detergent to remove the dirt.

6)See also Repair and Maintenance Safety on page 4 of this manual.

7)All replacement parts must meet manufacturer’s specifications.

Page 9

LS401213, LS401224, LS401216, LS401221, LS401216, LS401213, LS401224 specifications

Briggs & Stratton has long been a leader in the field of small engine technology, and their latest offerings—LS401216, LS401224, LS401213, and LS401221—are no exception. These models represent a perfect blend of performance, efficiency, and durability, making them ideal solutions for various applications, including lawn care and outdoor equipment.

The LS401216, LS401224, LS401213, and LS401221 are powered by advanced OHV (Overhead Valve) technology, which enhances fuel efficiency and overall engine performance. This design helps to optimize airflow and combustion, resulting in lower emissions and reduced fuel consumption. Consequently, users benefit from longer run times and improved energy efficiency, making these models both eco-friendly and cost-effective.

Each engine model is designed with a robust construction that ensures longevity and reliability. The high-quality materials used in their construction provide excellent resistance to wear and tear, making them suitable for demanding environments. Additionally, the engines feature a lightweight design, making them easy to maneuver and install, without compromising on power.

One of the standout features across these models is the quick-start technology, allowing for easy ignition regardless of temperature or environmental conditions. Users can enjoy hassle-free starts with just a simple pull, enhancing productivity during operation. Furthermore, the integrated air filtration systems enhance engine performance by preventing dirt and debris from entering, which can prolong the engine's lifespan.

The LS401216, LS401224, LS401213, and LS401221 engines also feature customizable options, allowing users to select the horsepower and torque suitable for their specific needs. This versatility ensures that they can be used across a variety of applications, from pushing mowers to pressure washers, making them a popular choice among homeowners and professionals alike.

In addition to performance attributes, these engines are engineered for user comfort and convenience. Features such as vibration dampening and ergonomic designs make operation more comfortable, reducing fatigue during prolonged use. Maintenance is also straightforward, with easy-access components making routine checks and service a breeze.

In summary, the Briggs & Stratton LS401216, LS401224, LS401213, and LS401221 are powerful, efficient, and durable engines catering to diverse outdoor needs. With advanced technology, robust construction, and user-friendly features, these engines exemplify the commitment of Briggs & Stratton to innovation and performance in the small engine sector. Whether for commercial or residential use, these models stand as reliable workhorses in the industry.