Briggs & Stratton NSPVH21675 specifications Storage Procedure, Wheel Drive Components

Page 12

Maintenance

!

WARNING

!

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

Wheel Drive Components

1.Remove the rear cover. Refer to the Section entitled “Rear Cover Removal & Installation”.

2.Clean any debris buildup on or around the transmission, axles, idler, pulleys, belt, etc., as well as on the inside of the cover. Check components for wear or damage.

Replace worn or damaged components immediately.

3.Replace the rear cover.

Important: DO NOT operate the mower without the rear cover securely in place.

Storage Procedure

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain the fuel from the fuel tank and let the engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from the spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into the exhaust or air intakes during washing.

4.Tilt the mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt the mower with the spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and/or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Carefully fold the handles, “flexing” the control cables to prevent cable damage.

7.Store the mower in a shed or other dry area, protected from weather.

10

www.snapper.com

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Variable Speed Rear Discharge Walk Behind Mowers Product Registration Date of Purchase Retailer Retailers Phone Number EquipmentEngine Table of Contents Protection for Children Slope OperationPreparation From Previous ColumnMaintenance and Storage OperationFeatures and Controls Pre-Start Check List Starting and OperationEngine and Blade Handle Height Adjustment StoppingPropelling the Mower Cutting Height Adjustment Installing the Discharge DeflectorRecycling Operation Installing the Grass Bag Removing the Recycling PlugMaintenance Introduction Service After First 5 HoursService Periodic Storage Procedure Wheel Drive ComponentsMower Blade Replacement Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Wheel drive controlsBelt Service Engine Drive Belt ReplacementRear Cover Removal and Installation To Install the Rear CoverTo Remove the Rear Cover Service Schedule SeasonTroubleshooting Probable Cause Corrective ActionYear Limited Warranty Disclaimer of WarrantyPage Slope Guide Page Page Product Specifications All Common Service Parts Part Number

SPVH21675, NSPVH21675 specifications

Briggs & Stratton NSPVH21675 and SPVH21675 are advanced vertical shaft engines designed to deliver reliable power for various outdoor equipment. Known for their durability and performance, these engines are ideal for lawn mowers, pressure washers, and other gardening tools, making them a popular choice among both residential and commercial users.

One of the standout features of the NSPVH21675 and SPVH21675 is their robust construction, which includes a cast-iron cylinder sleeve that enhances strength and prolongs engine life. This ensures that these engines can withstand the rigors of tough outdoor tasks while maintaining optimal performance. The design is further complemented by an aluminum crankcase that contributes to reduced weight without sacrificing durability.

Another key aspect of these engines is the innovative Direct Inject Technology. This advanced fuel management system allows for improved fuel efficiency by optimizing the air-fuel mixture delivered to the combustion chamber. As a result, users can expect enhanced power output while consuming less fuel, making these engines an eco-friendlier option.

The NSPVH21675 and SPVH21675 also feature a unique intake and exhaust system that maximizes airflow. This design not only enhances engine performance but also contributes to quieter operation. Operators will appreciate the reduced noise levels, making their time spent working outdoors more pleasant.

In terms of maintenance, Briggs & Stratton has engineered these models with user-friendly accessibility in mind. Routine checks and maintenance tasks are straightforward, allowing operators to spend more time on their projects rather than on upkeep. The engines are also equipped with an oil alert system, which helps prevent issues related to low oil levels, promoting longevity and reliability.

Both engines are designed with versatility in mind, able to power a range of equipment with different requirements. This adaptability is further exemplified by their electric start option, which simplifies the starting process and is particularly beneficial for larger machines that may require more effort to start.

Overall, the Briggs & Stratton NSPVH21675 and SPVH21675 engines represent a blend of power, efficiency, and ease of use. With their innovative technologies, robust construction, and user-friendly designs, they are a top choice for anyone in need of reliable outdoor power equipment solutions. Whether for personal use or professional landscaping, these engines provide the performance and durability to get the job done efficiently and effectively.
Top Page Image Contents