Briggs & Stratton 5900703 manual Safety Rules Information

Page 4

Safety Rules

and Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The

triangle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the unit’s controls and how to stop quickly.

READ THE OPERATOR’S MANUALS.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the PTO. Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the unit.

DO NOT operate the unit without either the entire grass catcher or the deflector in place.

Turn off the PTO to disengage the blades when not mowing.

DO NOT mow in reverse unless absolutely neces- sary. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers.

When collection system is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for

tears, holes, or weak spots and replace with a new bag that meets manufacturer’s durability standards.

If the mower stalls or the collector chute plugs:

1.Disengage the PTO;

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute

with a piece of wood before restarting the engine.

NEVER place hands into COLLECTOR OR MOWER housing to clear jammed objects. Blower OR MOWER may rotate when object is removed.

For added stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

Never operate on slopes greater than 17.6%

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

If any decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider, attachments and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your product.

Attachment Decal

WARNING

Thrown objects hazard

• Objects thrown by the mower can seriously injure or kill you.

Do not open the hopper while the mower blades are turning.

Do not operate the mower without the complete

catcher in place.

1732819

Decal - WARNING

Thrown Objects Hazard

Part Number 1732819

Read and obey all operation and warning decals.

TP 100-4785-00AT-SMAN

2

Image 4
Contents OPERATOR’S Manual Page Table of Contents Safety Rules Information General Operating Instructions Tube Component Assembly Baffle AssemblyComponent Installation Bag and Cover Support Installation Cover and Bag Installation Tube Installation Collector Installation and Removal Carrier Installation Hitch Plate and Back Plate Installation Grass Catcher Removal and Attachment Cover Hinge Hair Pin Clip Hinge PinGrass Catcher Removal and Attachment

5900703 specifications

Briggs & Stratton is a well-known name in the world of small engines, particularly famous for their reliability and innovation. One of their notable products is the Briggs & Stratton 5900703, a high-performance spark plug that plays an essential role in the functioning of various small engines, including those found in lawn mowers, generators, and other outdoor power equipment.

The Briggs & Stratton 5900703 spark plug is designed to ensure optimal engine performance. One of its key features is its durability and resistance to wear and corrosion. This is crucial for maintaining engine efficiency and prolonging the lifespan of the equipment. The spark plug is built with a robust construction that can withstand the extreme conditions typically faced by outdoor power equipment.

Another significant characteristic of the Briggs & Stratton 5900703 is its superior heat range. This spark plug is engineered to provide the right thermal balance, ensuring that the engine operates smoothly without overheating. This feature is instrumental in achieving reliable ignition and combustion, which in turn improves fuel efficiency and reduces emissions, making it an environmentally friendly choice for consumers.

The design of the 5900703 also incorporates advanced firing technology that enhances ignition reliability. This allows for easier starting and smoother operation, which are essential for both casual users and professionals alike. The spark plug provides a strong and consistent spark, which is vital for optimal engine performance, especially in engines that require quick and reliable starts.

Additionally, the 5900703 is compatible with a broad range of Briggs & Stratton engines, making it a versatile choice for many users. Its easy installation process means that both hobbyists and professional technicians can replace the spark plug without complicated tools or extensive mechanical knowledge.

In summary, the Briggs & Stratton 5900703 spark plug embodies reliability, durability, and efficiency. With its advanced features and technologies, it not only enhances engine performance but also contributes to a cleaner environment and greater user satisfaction. Whether you are maintaining residential equipment or operating commercial machinery, the Briggs & Stratton 5900703 is an excellent choice that meets the demands of small engine applications.