Brinly-Hardy ST-151BH, ST-251BH owner manual Safety, Towing Safely

Page 3

SAFETY

TO HELP PREVENT BODILY INJURY DUE TO LOSS OF STABILITY OR CONTROL:

•Do not exceed maximum towing capacity of towing vehi- cle listed in the vehicle operator's manual.

•Do not exceed 5 mph.

•Do not tow this machine behind a motor vehicle such as a car or truck.

•Do not tow this machine behind a ZTR (Zero Turn Radius) Mower.

SAFETY

Read the general safety operating precautions in your towing vehi- cle operator's manual for additional safety information.

Operate Safely

Use this machine for intended purpose only.

This machine is intended for use in lawn care and home applica- tions. Do not tow behind a vehicle on a highway or in any high speed applications. Do not tow at speeds higher than maximum recommended towing speed.

Towing speed should always be slow enough to maintain control. Travel slowly over rough ground.

Do not let children or an untrained person operate machine.

Do not let anyone, especially children, ride on this machine or the towing vehicle. Riders are subject to injury such as being struck by foreign objects and being thrown off. Riders may also obstruct the operator's view, resulting in this machine being operated in an unsafe manner.

Check towing vehicle brake action before you operate. Adjust or service brakes as necessary.

Keep all parts in good condition and properly installed. Fix dam- aged parts immediately. Replace worn or broken parts. Replace all worn or damaged safety and instruction decals.

Do not modify the machine or safety devices. Unauthorized modifi- cations to the towing vehicle or machine may impair its function and safety, and void the warranty.

Keep all nuts, bolts and screws tight.

Caution should always be exercised whenever working on or near batteries. Heavy gloves and eye protection show be worn when making connections to a battery.

TOWING SAFELY

Stopping distance increases with speed and weight of towed load. Travel slowly and allow extra time and distance to stop.

Total towed weight must not exceed limits specified in towing vehi- cle operator's manual.

Excessive towed load can cause loss of traction and loss of control on slopes. Reduce towed weight when operating on slopes.

Never allow children or others in or on towed equipment.

Use only approved hitches. Tow only with a machine that has a hitch designed for towing. Do not attach this machine except at the approved hitch point.

Follow the manufacturer's recommendations for weight limits for towed equipment and towing on slopes. Use counterweights or wheel weights as described in the towing vehicle operator's man- ual.

Do not turn sharply. Use additional caution when turning or operat- ing under adverse surface conditions. Use care when reversing. To avoid jack-knifing, do not allow towing vehicle wheels to contact drawbar.

Do not shift to neutral and coast downhill.

Protect Bystanders

Keep bystanders away when you operate this machine Before you back look carefully behind for bystanders.

Before you operate any feature of this machine, observe your sur- roundings and look for bystanders.

Keep Riders Off Towed Attachment

Keep riders off towed attachment.

Riders on a towed attachment are subject to injury, such as being struck by objects and being thrown off the attachment during sud- den starts, stops and turns.

Riders obstruct the operator's view, resulting in the attachment being used in an unsafe manner.

Keep riders off of hitch bracket.

Keep Body Parts From Under Drawbar

Before disconnecting this machine from towing vehicle hitch plate:

•Stop on level ground.

•Stop towing vehicle engine.

•Lock towing vehicle park brake.

•Block wheels of the machine.

•Make sure body parts are not under drawbar.

L-1914 Rev. B

2.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents N E R ’ S M a N U a L Introduction Safety SafetyTowing Safely Parts Reference Exploded View Tank AssemblyDescription Parts List Tank AssemblyExploded View Trailer Assembly Parts List Trailer Assembly 1a. Install Clevis 33 to the Tow- bar Assembly1415 Swivel Nuts6a. Attach the 30 inch Hose Hose to Pump8a. Install Axle 37 in to Rear Base Install TowbarSupports To Boom Supports and tighten snugly using KnobConnect Pump Supply Hose to Boom Connect Sprayer Hoses Removing Sprayer Installing SprayerInstalling Electrical Connections OperationApplication Rate Pump OperationsWand Operations Boom OperationsExample Calculation Procedure for Sprayer ApplicationTowing Vehicle Requirements Calibration of SpeedMaintenance MaintenanceSpecifications 1914 Rev. B Pull Behind Accessories

ST-251BH, ST-151BH specifications

The Brinly-Hardy ST-151BH and ST-251BH are top-of-the-line tow-behind spreaders designed specifically for efficiently distributing a range of materials, including fertilizer, seed, and various other lawn care products. Known for their durability and advanced features, these spreaders have become essential tools for both homeowners and professional landscapers alike.

One of the main features of the ST-151BH and ST-251BH is their robust construction. Both models are built with corrosion-resistant materials, ensuring longevity even when exposed to harsh outdoor elements. The steel frame provides exceptional strength, while the UV-resistant polyethylene hopper prevents fading and ensures that the spreaders maintain their aesthetic appeal over time.

In terms of capacity, the ST-151BH boasts a 150-pound capacity, while the ST-251BH offers an impressive 250-pound capacity. This allows users to cover large areas without frequent refills, making these spreaders ideal for expansive lawns, gardens, and commercial landscapes.

Technologically, the Brinly-Hardy spreaders are equipped with a unique, adjustable flow rate system. This feature enables users to customize the rate at which materials are dispensed, ensuring accurate and even coverage. This precision not only enhances the effectiveness of the application but also minimizes waste, making it both an environmentally friendly and cost-effective solution.

The spreaders also integrate a heavy-duty gear-driven system, which offers reliable and consistent performance, even in challenging terrain. The large, pneumatic tires provide excellent traction, ensuring smooth operation across various surfaces, from gravel paths to grassy lawns.

Furthermore, both models are designed for easy assembly and use. The ergonomic handle provides comfortable control, while the integrated shut-off system allows for quick stops, reducing the chances of unnecessary material loss.

In conclusion, the Brinly-Hardy ST-151BH and ST-251BH represent the perfect blend of quality, efficiency, and innovation. With their durable construction, customizable features, and ease of use, these spreaders are undoubtedly valuable tools for anyone looking to promote healthy growth in their lawn or garden. Whether for personal use or professional landscaping, they deliver performance that meets the highest standards.
Top Page Image Contents