Bolens Series 544 manual Storing your Lawn Mower

Page 14

•Remove the blade and the adapter from the crankshaft.

Blade

Adapter

Blade Bell

Support

Hex Bolt

Figure 15

WARNING: Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary.

When sharpening the blade, follow the original angle of grind as a guide. It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade. An unbalanced blade will cause excessive vibration when rotating at high speeds. It may cause damage to the mower, and could break causing personal injury.

The blade can be tested by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly. It is recommended that the blade always be removed from the adapter when testing for balance. Before reinstalling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

•Be sure to install the blade with the side of the blade marked “Bottom” (or with part number) facing the ground when the mower is in the operating position.

•Slide the blade adapter onto the engine crankshaft.

•Place the blade on the adapter. Be certain the blade is aligned and seated on the blade adapter flanges.

•Place blade bell support on blade. Make sure the notches on the blade bell support are aligned with small holes in the blade.

•Replace hex bolt and tighten hex bolt to torque: 450 in. lbs. min., 600 in. lbs. max.

NOTE: To ensure safe operation of your mower, the blade bolt must be checked periodically for correct torque.

Storing your Lawn Mower

The following steps should be taken to prepare your lawn mower for storage.

•Clean and lubricate mower thoroughly as described in the lubrication instructions.

IMPORTANT:We do not recommend the use of a pressure washer or garden hose to clean your unit.

•Refer to engine manual for correct engine storage instructions.

•Coat mower’s cutting blade with chassis grease to prevent rusting.

•Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationChildren ServiceSlope Operation Do NotGeneral Service Slope Gauge Assembling Your Lawn Mower Disconnecting Spark Plug WireSetting Up Your Lawn Mower Removing Unit From CartonGrass Catcher Assembly Mulching Plug Converting To Side DischargeGrass Catcher Recoil StarterGas and Oil Fill-Up Using Your Lawn MowerOperating Your Lawn Mower Starting EngineEngine Adjustments Handle Height AdjustmentCutting Height Adjustment Maintaining Your Lawn Mower General RecommendationsLubrication Maintenance Replacing Rear FlapCutting Blade Removal, Replacement, and Sharpening EngineStoring your Lawn Mower Troubleshooting Problem Cause RemedyModel Series Model Series Part DescriptionPage Page MANUFACTURER’S Limited Warranty for

Series 544 specifications

The Bolens Series 544 is a well-regarded garden and landscape tractor, showcasing a robust design and innovative technologies tailored to meet the needs of homeowners and professional landscapers alike. This series is marked by its reliable performance, durability, and versatility, making it a favored choice among outdoor maintenance enthusiasts.

One of the standout features of the Bolens Series 544 is its powerful engine. Equipped with a high-performance 18.5 horsepower Kohler engine, this tractor offers ample power to tackle various lawn and garden tasks. The engine's efficiency ensures reduced fuel consumption while maintaining strong performance levels, allowing users to complete their work without frequent refueling.

The transmission system in the Bolens 544 comprises a hydrostatic drive, providing seamless operation and effortless shifting. Operators can easily adjust speeds and directions without the need for clutching or gear shifting, making it user-friendly, especially for those unfamiliar with traditional gear tractors. This feature is particularly beneficial for intricate mowing patterns or navigating around obstacles in the garden.

The cutting deck on the Bolens Series 544 is another remarkable aspect, typically featuring a 42-inch wide deck. This design enables users to cover a larger area in less time, increasing efficiency during mowing sessions. The deck height is adjustable, allowing for customized cutting heights, which is essential for adapting to different grass types and seasonal changes.

In terms of build quality, the Bolens Series 544 boasts a heavy-duty steel frame and durable components that withstand the rigors of outdoor tasks. Its design ensures stability and durability, withstanding potential wear and tear from routine use. Additionally, the tractor comes with a comfortable high-back seat, ensuring that operators remain relaxed even during prolonged operating sessions.

The versatility of the Bolens 544 is enhanced by its compatibility with various lawn care attachments. Whether it's snow removal, tilling, or grass collection, this tractor can easily adapt to numerous tasks, making it a multifaceted tool for any lawn care enthusiast.

In conclusion, the Bolens Series 544 represents a blend of power, efficiency, and adaptability. With its robust engine, user-friendly transmission, adjustable cutting deck, and durable construction, this tractor is designed to meet the demands of both homeowners and professionals. Whether for mowing, landscaping, or snow management, the Bolens 544 stands out as a reliable companion in outdoor maintenance.
Top Page Image Contents