Lubrication, Replacing Rear Flap

•Slide the blade adapter onto the engine crankshaft.

•Place the blade on the adapter.The blade has to be aligned and seated on the blade adapter flanges.

•Place blade bell support on blade. Make sure the notches on the blade bell support are aligned with small holes in the blade.

•Replace hex bolt and tighten hex bolt to torque: 450 in. lbs. min., 600 in. lbs. max.

NOTE: To ensure safe operation, the blade bolt must be checked periodically for correct torque.

Engine

Follow the engine manual for lubrication instructions.

Lubricate

Lubrication

WARNING: Always stop engine and disconnect spark plug wire before cleaning, lubricating or doing any kind of service work on the lawn mower.

Blade Control

Lubricate the pivot points on the blade control handle at least once a season with light oil. The blade control must operate freely in both directions.See Figure 14.

Wheels

Lubricate the wheels at least once a season with light oil (or motor oil). If the wheels are removed for any reason, lubricate the surface of the axle bolt and inner surface of the wheel with light oil. See Figure 14.

Rear Discharge Door

Lubricate the torsion springs and pivot points on rear discharge door using light oil. This will insure the door, which is a safety device, can always work properly.

Figure 14

Replacing Rear Flap

•To remove rear flap, cut off the flat end of the wire rod which secures it to the deck. See Figure 15.

•Attach the new flap and new rod to deck, bending the ends of the new rod over to secure to deck.

	Rear Discharge
	Door
Handle
Bracket	d
	o
	R
	e
	ir
	W	Handle
		Handle
		Bracket
		Rear
		Flap
	Figure 15

SECTION 8: OFF-SEASON STORAGE

The following steps should be taken to prepare your lawn mower for storage.

WARNING: Be sure to disconnect the spark plug wire and DE-ENERGIZE starter

before performing any repairs or maintenance. DO NOT attempt any maintenance or service to the engine and/or mower equipped with the safety key in the unlocked and/or energized mode.

WARNING: NEVER assume starter is de- energized, even if the key is in the locked position and/or removed from the engine. ALWAYS de-energize self starter prior to performing any maintenance or service to the engine and/or mower. Follow instructions on the engine and/or machine to de-energize starter.

WARNING: Never store the machine or fuel container indoors where there is an open flame, spark or pilot light such as on water heater, furnace, clothes dryer or other gas appliance.

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. They may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will result in shortened life and reduce serviceability.

•Refer to engine manual for storage instructions.

•Coat mower’s cutting blade with chassis grease to prevent rusting.

•Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts.

589 specifications

The Bolens 589 is a versatile riding lawn mower that captures the essence of performance, durability, and user-friendly design. Built to meet the needs of both residential homeowners and landscaping professionals, this machine is equipped with features that optimize mowing efficiency and enhance user experience.

One of the standout characteristics of the Bolens 589 is its powerful engine. It typically features a robust 19 to 20 horsepower engine that ensures efficient cutting power, making it suitable for larger lawns and rugged terrains. This powerful engine is paired with a reliable automatic transmission that provides smooth and easy maneuverability, allowing users to tackle various yard sizes without difficulty.

The cutting deck on the Bolens 589 is designed for precision and durability. With a width ranging from 42 to 46 inches, it is capable of making quick work of grass while leaving a clean, professional finish. The deck is made from heavy-duty steel, ensuring it can withstand the rigors of regular use. Additionally, the deck height can typically be adjusted to suit different grass types and cutting conditions, giving users the flexibility they need for various lawn care tasks.

In terms of comfort, the Bolens 589 is built with the operator in mind. It features a plush, adjustable seat that provides support during extended mowing sessions. The controls are intuitively placed, allowing for effortless operation and quick adjustments while driving. Enhanced visibility from the driver's seat is another design consideration that bolsters safety and effectiveness when mowing in tight spaces.

Innovation is evident in the Bolens 589 with its inclusion of modern technologies. Some models may include features like LED headlights for improved visibility during early morning or late evening mowing sessions, and mulching capabilities that allow for finer grass clippings that can be left on the lawn as natural fertilizer.

Moreover, the Bolens 589 often showcases a durable frame to withstand seasonal changes and heavy use. Its robust construction not only extends the life of the equipment but also ensures stability on uneven surfaces. Combined with a user-friendly maintenance system, the Bolens 589 makes upkeep simple and efficient, allowing owners to focus more on lawn care.

Overall, the Bolens 589 is a well-rounded riding lawn mower that excels in providing power, comfort, and ease of use. With its combination of features and technologies, it stands as a strong contender in the market, meeting the diverse needs of grass enthusiasts and professionals alike.