Bolens Complete Guide for Attaching Cutting Blades and Discharge Chute - 190-821 Dumps
Page 8
Retainer
Strap

ATTACHING THE CUTTING BLADES

WARNING: Cutting blades are sharp. Always protect hands by wearing heavy leather work gloves to grasp blades.

Remove the blades from your tractor’s cutting deck as follows.

1.Remove the cutting deck from beneath the tractor, (refer to DECK REMOVAL in the MAINTENANCE section of your tractor’s Operator’s Manual for detailed instructions) then gently flip the deck over to expose its underside.

2.Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See Figure 7.

3.Use a 15/16" wrench to remove the hex flange nut that secures the blade to the spindle assembly. See Figure 7.

NOTE: The hex flange nut has a right-handed thread pattern. Do NOT attempt to force the nut in the incorrect direction. Doing so may damage the nut and create a safety hazard.

Hex Flange Nut

Block of Wood

Cutting Blade

Spindle

Assembly

Figure 7

4.Install the new blades packed with the bagger. Be sure to install the blade with the side of the blade marked ‘‘Bottom’’ (or with a part number stamped in it) facing the ground when the mower is in the operating position.

IMPORTANT: Mount the smaller of the three blades to the center spindle. The remaining two blades are interchangeable.

IMPORTANT: Use a torque wrench to tighten the blade spindle hex flange nut to between 70 foot- pounds and 90 foot-pounds.

5. Remount the cutting deck.

ATTACHING THE DISCHARGE CHUTE

1.Raise the deck to its highest position by placing the lift lever in the top notch on the right fender. Raise the chute deflector on the deck.

2.Place the top edge of the discharge chute in position over the chute opening on the deck, then push down on the discharge chute so the front edge fits snugly around the cutting deck opening. See Figure 8.

Chute

Deflector

Clip

Discharge Chute Cutting Deck

Figure 8

3.Fasten the discharge chute in position by hooking the retainer strap over the retainer clip on the top* of the deck. See Figure 8.

*NOTE: On later model decks, the retainer clip may be found on the SIDE or on the FRONT SKIRT area of the deck rather than on the top of it.

4.Insert the upper end of the chute tube into the hole in the cover assembly, then insert the extension tube between the discharge chute and the chute tube as shown in Figure 9.

5.Secure by placing the ends of the retainer straps on the discharge chute over the clips on the chute tube. See Figure 9.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioFinding Your Model Number Calling Customer SupportImportant Safe Operation Practices General OperationService Slope OperationDo not ChildrenDo not Open this Cover Unless Engine is Shut OFF Contents of Carton To the OwnerAttaching the Cover and Bags AssemblyMounting the Bracket Assembly Attaching the Cutting Blades Attaching the Discharge ChuteOperation Grass BAG RemovalModel Description MANUFACTURER’S Limited Warranty

OEM-190-821 specifications

The Bolens OEM-190-821 is a notable outdoor power equipment accessory that has garnered attention for its reliability and performance. Designed specifically for grass and lawn maintenance, this product embodies the essence of precision engineering, making it a valuable addition to the toolkit of any gardening enthusiast or professional landscaper.

One of the main features of the Bolens OEM-190-821 is its robust construction. Made with high-quality materials, this accessory is engineered to withstand the rigors of frequent use in diverse weather conditions. The durability ensures longevity, minimizing the need for frequent replacements and repairs. Additionally, it offers a lightweight design that provides ease of handling while not compromising on strength.

A significant characteristic of the Bolens OEM-190-821 is its compatibility with a variety of Bolens riding mowers and tractors. This versatility makes it an ideal choice for those who own multiple machines, as it allows seamless integration across various models. This compatibility enhances user convenience, enabling operators to maximize the use of their equipment without needing an array of specialized accessories.

The technology behind the Bolens OEM-190-821 ensures efficient operation. The product features advanced engineering that optimizes cutting performance, delivering clean and precise cuts on various types of grass. This is crucial for maintaining healthy lawns, as uneven trimming can lead to brown patches and unhealthy growth.

Another key aspect of this product is its ease of installation and maintenance. With a simple mounting process, users can quickly attach the accessory without the need for specialist tools. This user-friendly approach is especially beneficial for those who prioritize efficiency and want to spend more time on their gardening rather than on complicated setup procedures. Furthermore, routine maintenance requirements are minimal, allowing users to focus on their outdoor projects without unnecessary interruptions.

In conclusion, the Bolens OEM-190-821 stands out for its durable construction, compatibility with various Bolens machines, advanced technology for efficient cutting, and ease of installation. It is an excellent investment for anyone looking to enhance their lawn care capabilities, offering reliability and performance that aligns with both casual users and professional landscapers alike.
Top Page Image Contents