English 11
Declaration of Conformity
| 3 600 ... | H82 0.. | H82 1.. |
We declare under our sole responsibility that the product described under “Tech- |
|
|
|
nical data” is in conformity with the following standards or standardization docu- |
|
|
|
ments: EN 60335 according to the provisions of the directives 2004/108/EC, |
|
|
|
2006/42/EC, 2000/14/EC. |
|
|
|
2000/14/EC: Guaranteed sound power level | dB(A) | 94 | 95 |
Conformity assessment procedure according to Annex VI. |
|
|
|
Equipment category: 32
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file at:
Bosch Lawn and Garden Ltd.,
Dr. Egbert Schneider | Dr. Eckerhard Strötgen |
Senior Vice President | Head of Product |
Engineering | Certification |
Robert Bosch GmbH, Power Tools Division
Mounting and Operation
Action | Figure |
Delivery Scope | 1 |
Handle Assembly | 2 |
Snap together the Grassbox | 3 |
Grassbox fitting/removing | 3 |
Adjusting the Cutting Height | 4 |
Connecting the Extension Lead | 5 |
Starting | 5 |
Stopping | 5 |
Working Advice | 5 – 6 |
Blade Maintenance | 7 |
Selecting Accessories | 8 |
Troubleshooting
STOP |
|
| |
|
|
| |
Problem | Possible Cause | Corrective Action | |
Motor refuses to | Power turned off | Turn power on | |
start |
|
| |
Mains socket faulty | Use another socket | ||
| |||
|
|
| |
| Extension cable damaged | Inspect cable, replace if damaged | |
|
|
| |
| Fuse faulty/blown | Replace fuse | |
|
|
| |
| Grass too long | Increase height of cut and tilt garden prod- | |
|
| uct to reduce starting load | |
|
|
| |
| Motor protector has activated | Allow motor to cool and increase height of | |
|
| cut | |
|
|
| |
Garden product | Extension cable damaged | Inspect cable, replace if damaged | |
functions |
|
| |
Internal wiring of garden product damaged | Contact Service Agent | ||
intermittently | |||
|
| ||
Motor protector has activated | Allow motor to cool and increase height of | ||
| |||
|
| cut | |
|
|
| |
Garden product | Height of cut too low | Increase height of cut | |
leaves ragged finish |
|
| |
Cutting blade blunt | Replace the blade | ||
and/or |
|
| |
Possible clogging | Check underneath the garden product and | ||
Motor labours | |||
|
| clear out as necessary (always wear garden- | |
|
| ing gloves) | |
|
|
| |
| Blade fitted upside down | Refit blade correctly | |
|
|
| |
Blade not rotating | Cutting blade obstructed | Switch off garden product | |
while garden prod- |
| Clear obstruction (always wear gardening | |
uct switched on |
| ||
| gloves) | ||
|
| ||
| Blade nut/bolt loose | Tighten blade nut/bolt (17 Nm) | |
Excessive | Blade nut/bolt loose | Tighten blade nut/bolt (17 Nm) | |
vibrations/noise |
|
| |
Cutting blade damaged | Replace the blade | ||
|
After-sales Service and Customer Assistance
In all correspondence and spare parts orders, please always include the
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Bosch Power Tools |
|
| F 016 L70 837 (23.3.11) |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|