Protecting the environment

ENGLISH

(Original instructions)

•Place the new saw chain in the groove of the guide bar and around the sprocket. Make sure that the teeth are facing the correct direction by matching the arrow on the saw chain with the arrow on the housing.

•Make sure that the slot (20) in the guide bar is over the location pins (21) and that the hole

(22)below the slot is located over the adjust- ment pin (23).

•Re-fit the sprocket cover (5) and the bar clamp

(17)and the screws (16).

•Tighten the screws (16) using the Allen key provided.

•Adjust the chain tension as described below. To ensure continued safe operation, the chain and guide bar must only be replaced with original Black & Decker parts. Replacement chain part number A6158 replacement guide bar part number 623381-00.

Checking and adjusting the chain tension (fig. G)

•Check the saw chain tension. The tension is correct when the saw chain (7) snaps back after being pulled away 3 mm from the saw chain bar with light force from the middle finger and thumb. There should be no ‘sag’ between the guide bar (6) and the saw chain (7) on the underside.

To adjust the tension:

•Loosen the screws (16).

•Turn the screw (18) clockwise.

Warning! Do not over-tension the chain as this will lead to excessive wear and will reduce the life of the bar and chain.

•Once the chain tension is correct, tighten the

screws (18).

Warning! When the saw chain is new, check the tension frequently during the first two hours of use as a new saw chain stretches slightly.

Oiling the chain

The saw chain must be oiled before each use and after cleaning using only the correct grade of oil (cat. no. A6027).

•Oil the whole saw chain (7) evenly using the applicator (9).

Storage

When the tool will not be used for several months, ideally leave the battery connected to the charger.

Otherwise proceed as follows:

•Fully charge the battery.

•Remove the battery from the tool.

•Store the tool and battery in a secure and dry location.

•The storage temperature must always remain in the range of +10 °C to +40 °C. Place the battery on a level surface.

•Before using the tool after prolonged storage, fully charge the battery again.

Z Separate collection. This product must not be disposed of with normal house- hold waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

z	Separate collection of used products
	and packaging allows materials to
	be recycled and used again. Reuse
	of recycled materials helps prevent
	environmental pollution and reduces the
	demand for raw materials.

Local regulations may provide for separate collec- tion of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will col- lect them on our behalf.

You can check the location of your nearest author- ised repair agent by contacting your local Black

&Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after- sales service and contacts are available on the Internet at:

www.2helpU.com

GPC1800, GPC1800P specifications

The Black & Decker GPC1800P and GPC1800 are two innovative outdoor power tools designed to meet the needs of homeowners and gardening enthusiasts alike. Both models are part of a broader range of cordless garden tools that emphasize convenience, ease of use, and performance.

The GPC1800P features an 18V lithium-ion battery, making it a highly efficient choice for those who require mobility without sacrificing power. The lithium-ion technology offers a longer runtime and quicker charging times compared to traditional batteries. This means users can spend more time enjoying their gardening activities and less time tethered to electrical outlets.

Another notable feature of the GPC1800P is its 12-inch cutting bar, designed to tackle branches up to 6 inches in diameter. Equipped with a high-performance motor, this tool provides consistent cutting power, ensuring a clean and efficient cut every time. The automatic oiling system keeps the cutting bar and chain well-lubricated, reducing friction and extending the lifespan of the tool.

In addition to the GPC1800P, the GPC1800 serves as a strong companion in this lineup. Like its counterpart, it boasts an 18V battery, providing versatility across a variety of cutting tasks. The GPC1800 is known for its lightweight design, which enhances maneuverability, making it easier to handle during longer sessions. This model also features a simple tool-free chain tensioning system, allowing quick adjustments and facilitating maintenance.

Both models implement safety features such as a front handguard to prevent accidental slips and a safety lock that must be engaged to start the tool. This ensures user protection while working, especially in challenging environments.

User comfort has not been overlooked, with ergonomic handles designed to reduce fatigue during extended use. The balanced design contributes to easier handling and controlled cutting angles, allowing for detailed work in gardens, backyards, and landscaping projects.

In summary, the Black & Decker GPC1800P and GPC1800 combine power, efficiency, and user-friendly features, making them excellent options for those looking to maintain their outdoor spaces with ease. With these models, Black & Decker continues to solidify its reputation as a leader in innovative power tools designed for modern gardening needs.