Cleaning, maintenance and storage

After several charge and discharge cycles, the battery will attain full capacity. The battery may become warm while charging; this is normal and does not indicate a problem.

Warning! Do not charge the battery at ambi- ent temperatures below 10 °C or above 40 °C. Recommended charging temperature: approx. 24°C.

•To charge the battery (11), remove it from the tool and insert it into the charger (12). The battery will only fit into the charger in one way. Do not force. Be sure that the battery is fully seated in the charger.

•Plug in the charger.

8 hour charger

The battery will be fully charged in approx. 8 hours. It can be removed at any time or left in the con- nected charger indefinitely.

Switching on and off (fig. E)

For your safety, this tool is equipped with a double switching system. This system prevents starting the tool inadvertently.

Switching on

•Push the lock-off button (2) backward using your thumb and at the same time squeeze the on/off switch (1).

•Release the lock-off button (2).

Switching off

• Release the on/off switch (1).

Warning! Never attempt to lock a switch in the on position.

(Original instructions)

ENGLISH

Your Black & Decker corded/cordless appliance/ tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintencance on corded/cordless power tools:

•Switch off and unplug the appliance/tool

•Or switch off and remove the battery from the appliance/tool if the appliance/tool has a separate battery pack

•Or run the battery down completely if it is integral and then switch off

•Unplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning.

Regularly clean the ventilation slots in you appli- ance/tool/charger using a soft brush or dry cloth. Regularly clean the motor houseing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Regularly open the chuck and tap it to remove any dust from the interior (when fitted).

After use and before storage

•Regularly clean the ventilation slots with a clean, dry paint brush.

•To clean the tool, use only mild soap and a damp cloth. Never let any liquid get inside the tool and never immerse any part of the tool into liquid.

•Remove debris using a hard brush.

•Lubricate the chain with oil.

Pruning (fig. F)

•Make sure the tool is running at full speed before making a cut.

•Hold the tool firmly in place to avoid possible bouncing or sideways movement of the tool.

•Guide the tool through the branch using light pressure. When cutting heavy branches, where a partial cut may splinter and damage the tree, proceed as follows:

--Make the first cut 15 cm from the tree trunk on the underside of the limb. Use the top of the guide bar (7) to make this cut.

--Cut one third through the diameter of the limb. Then cut down from the top.

Installing and removing the saw chain (fig. G & H)

Warning! Always wear protective gloves when installing or removing the saw chain. The saw chain is sharp and can cut you when it is not running.

•Place the tool on a firm and stable surface.

•Loosen the screws (16) using the Allen key provided. Remove the screws.

•Remove the sprocket cover (5) and the bar clamp (17).

•Turn the screw (18) counterclockwise to allow the guide bar (6) to recede and to reduce the tension on the saw chain (7).

•Remove the old saw chain from the sprocket (19) and the guide bar (6).

GPC1800, GPC1800P specifications

The Black & Decker GPC1800P and GPC1800 are two innovative outdoor power tools designed to meet the needs of homeowners and gardening enthusiasts alike. Both models are part of a broader range of cordless garden tools that emphasize convenience, ease of use, and performance.

The GPC1800P features an 18V lithium-ion battery, making it a highly efficient choice for those who require mobility without sacrificing power. The lithium-ion technology offers a longer runtime and quicker charging times compared to traditional batteries. This means users can spend more time enjoying their gardening activities and less time tethered to electrical outlets.

Another notable feature of the GPC1800P is its 12-inch cutting bar, designed to tackle branches up to 6 inches in diameter. Equipped with a high-performance motor, this tool provides consistent cutting power, ensuring a clean and efficient cut every time. The automatic oiling system keeps the cutting bar and chain well-lubricated, reducing friction and extending the lifespan of the tool.

In addition to the GPC1800P, the GPC1800 serves as a strong companion in this lineup. Like its counterpart, it boasts an 18V battery, providing versatility across a variety of cutting tasks. The GPC1800 is known for its lightweight design, which enhances maneuverability, making it easier to handle during longer sessions. This model also features a simple tool-free chain tensioning system, allowing quick adjustments and facilitating maintenance.

Both models implement safety features such as a front handguard to prevent accidental slips and a safety lock that must be engaged to start the tool. This ensures user protection while working, especially in challenging environments.

User comfort has not been overlooked, with ergonomic handles designed to reduce fatigue during extended use. The balanced design contributes to easier handling and controlled cutting angles, allowing for detailed work in gardens, backyards, and landscaping projects.

In summary, the Black & Decker GPC1800P and GPC1800 combine power, efficiency, and user-friendly features, making them excellent options for those looking to maintain their outdoor spaces with ease. With these models, Black & Decker continues to solidify its reputation as a leader in innovative power tools designed for modern gardening needs.