Black & Decker 492172-00 instruction manual To Reduce Risk of Injury

Page 1

INSTRUCTION

MANUAL

DATE CODE

Catalog Number BV4000

KEY INFORMATION YOU SHOULD KNOW:

Before operating, make sure that either the blower or vacuum tube assembly is locked in place.

The power switch must be OFF in order to depress the release button for changing blower and vacuum tube assemblies.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Form No. 492172-00

Cat. # BV4000

(JAN. 2006)

Copyright © 2006 Black & Decker

 

Printed in Mexico

WARNING: Important Safety Warnings and Instructions

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS CAREFULLY BEFORE USING THE UNIT.

To Reduce Risk of Injury:

Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual.

Save these instructions and review frequently prior to use and in instructing others.

WARNING: When using electrical appliances, basic safety precautions should always be followed, including the following:

WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

compounds in fertilizers

compounds in insecticides, herbicides and pesticides

arsenic and chromium from chemically treated lumber

To reduce your exposure to these chemicals, wear approved safety equipment such as dust masks that are specially designed to filter out microscopic particles.

WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

READ ALL INSTRUCTIONS BEFORE USING BLOWER.

General Safety Warnings and Instructions for all Tools

READ and follow all instructions.

DO NOT place inlet or outlet of vacuum near eyes or ears when operating.

THIS APPLIANCE IS PROVIDED WITH DOUBLE INSULATION. Use only identical replacement parts. See instructions for servicing of double insulated appliances.

STORE IDLE TOOLS. When not in use, the unit should be stored in a dry, high or locked-up place - out of reach of children.

DON'T OVERREACH. Keep proper footing and balance at all times.

DO NOT pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.

MAINTAIN TOOL WITH CARE. Keep fan area clean for best and safest performance. Follow instructions for proper maintenance.

DO NOT attempt to repair the blower/vac. To assure product safety and reliability, repairs, maintenance, and adjustments should be performed by Black & Decker service centers or authorized service stations, always using Black & Decker replacement parts.

DO NOT operate blower/vac in a gaseous or explosive atmosphere. Motors in these tools normally spark, and the sparks might ignite fumes.

DO NOT use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

USE EXTRA CARE when cleaning on stairs.

DO NOT leave appliance when plugged in. Unplug from outlet when not in use and before servicing.

DO NOT allow to be used as a toy. Close attention is necessary when used by or near children. Not recommended for use by children.

DO NOT attempt to clear clogs from tool without first unplugging it.

USE ONLY as described in this manual. Use only manufacturer's recommended attachments.

DO NOT use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

DO NOT pull or carry by cord, use cord as a handle, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.

DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord.

DO NOT put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair and everything that may reduce air flow.

KEEP hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

TURN OFF all controls before unplugging.

DO NOT vacuum water, other liquids, or wet objects such as leaves. Never immerse any part of the tool in liquid.

DO NOT handle plug or appliance with wet hands.

KEEP CHILDREN, BYSTANDERS AND ANIMALS AWAY from the work area a minimum of 30 feet (10 meters) when starting or operating the tool.

INSPECT THE AREA before using the tool. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation. As a vacuum, the tool is designed to pick up dry material such as leaves, grass, small twigs, and bits of paper. Do not vacuum stones, gravel, metal, broken glass, etc.

WARNING: To reduce the risk of electrical shock; do not expose to rain, do not use on wet surfaces. Store indoors.

WARNING: Turn off and unplug unit, then wait until fan stops or at least 10 seconds before removing the blower or vacuum tube assemblies.

SAVE THESE INSTRUCTIONS

Servicing of Double Insulated Appliances

Your Blower/Vac is double-insulated to give you added safety. In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words double insulated or "double insulation". The symbol (square within a square) may also be marked on the appliance.

Safety Rules and Instructions: Extension Cords

Double insulated tools have 2-wire cords and can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.) (C.S.A. in Canada). If the extension will be used outside, the cord must be suitable for outdoor use. Any cord marked as outdoor can also be used for indoor work.

An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. Before using an extension cord, inspect it for loose or exposed wires, damaged insulation, and defective fittings. Make any needed repairs or replace the cord if necessary.

To determine the minimum wire size required, refer to the chart below:

 

 

 

Minimum Gage for Cord Sets

 

Volts

 

Total Length of Cord in Feet

120V

 

0-25

26-50

51-100

101-150

240V

 

0-50

51-100

101-200

201-300

Ampere Rating

 

 

 

More

Not more

American Wire Gage

 

Than

Than

 

 

 

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10

-

12

16

16

14

12

12 -

16

14

12

Not Recommended

 

 

 

 

 

 

 

1

 

RELEASE BUTTON

 

BOUTON DE DÉGAGEMENT

 

 

BOTÓN DE LIBERACIÓN

 

 

SWITCH

 

 

COMMUTATEUR

 

 

CONMUTADOR

0

I

II

OFF

LOW SPEED

HIGH SPEED

2

2 speed On/off switch

 

HORS TENSION BASSE VITESSE VITESSE ÉLEVÉE

 

Commutateur à deux vitesses

APAGADO

VELOCIDAD BAJA

VELOCIDAD ALTA

Interruptor de encendido y apagado con 2 velocidades

 

 

4

 

3

 

 

 

HOOK UNIT HERE FIRST

 

 

FIXER L'OUTIL ICI D'ABORD.

 

 

PRIMERO ENGANCHE

 

 

AQUÍ LA UNIDAD

5A

5B

5C

6

7A

7B

Image 1
Contents Servicing of Double Insulated Appliances To Reduce Risk of InjurySwitch Safety Rules and Instructions Polarized PlugAssembly Vacuum Tube Assembly FigMode aspirateur Mode de soufflageEntretien des outils a double isolation Mesures de sécurité cordons de rallongeGarantie complete de deux ans pour utilisation domestique Renseignemens relatifs au servicePara reducir el riesgo de lesiones Servicio a aparatos con doble aislamientoDispositivo de retención del cable Ensmblaje del tubo de soplado FigUsando su producto Fig Modo de soplador

492172-00 specifications

The Black & Decker 492172-00 is an innovative and versatile power tool accessory that stands out in the competitive home improvement market. This product is designed to enhance the capabilities of various Black & Decker tools, making it an essential addition for DIY enthusiasts and professional contractors alike.

One of the key features of the 492172-00 is its exceptional compatibility. It is engineered to work seamlessly with a range of Black & Decker’s cordless power tools, which allows users to easily switch between different applications without the need for multiple accessories. This compatibility not only saves time but also makes it a cost-effective solution for those who own several Black & Decker tools.

The 492172-00 boasts a robust construction that ensures durability and longevity. Made with high-quality materials, this accessory is built to withstand the rigors of demanding projects, whether you're engaged in heavy-duty construction work or light household repairs. This rugged design is especially important for users who require reliable performance over extended periods.

Another standout characteristic of the Black & Decker 492172-00 is its ergonomic design which significantly enhances user comfort and ease of use. The tool is designed with a grip that promotes better control during operation, reducing fatigue and making it easier to handle in prolonged tasks. This focus on ergonomics is a testament to Black & Decker’s commitment to user-friendly products.

Technologically, the 492172-00 incorporates advanced features that improve its performance. For instance, it often includes enhanced power transfer capabilities, which allow it to efficiently deliver optimal performance across various tasks. This technology not only improves the speed and accuracy of the work being done but also contributes to better outcomes in terms of finish and precision.

Furthermore, the Black & Decker brand is known for its innovative approach to tool development. With the 492172-00, users can expect features like quick-change mechanisms and easy-to-read indicators that help in maintaining the tool and ensuring it operates at peak efficiency.

In summary, the Black & Decker 492172-00 is a superior power tool accessory characterized by its broad compatibility, robust construction, ergonomic design, and advanced technology. These features make it an invaluable asset in any toolkit, whether for occasional home projects or professional undertakings, ensuring that it meets the demands of a wide range of users.