ENGLISH | (Original instructions) |
uDo not expose appliance to rain or wet conditions. Water entering a appliance will increase the risk of electric shock.
uDo not abuse the cord. Never use the cord for carrying, pulling or unplugging the appliance. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
uWhen operating an appliance outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
uIf operating an appliance in a damp location is unavoid- able, use a Residual Current Device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
After Use
uWhen not in use, the appliance should be stored in a dry, well ventilated place out of the reach of children.
uChildren should not have access to stored appliances.
uWhen the appliance is stored or transported in a vehicle it should be placed in the boot or restrained to prevent movement following sudden changes in speed or direc- tion.
uDo not place any objects into the openings. Never use if the openings are blocked - keep free of hair, lint, dust and anything that may reduce the airflow.
Warning! Always use your product in the manner outlined in this manual. Your product is designed to be used in an upright mode and if it is used in any other way it may result in injury. Never run your product whilst lying on it’s side or upside down.
uThe operator or user is responsible for accidents or hazards occurring to other people or their property.
uDo not carry the appliance by the cable.
uAlways direct the cable to the rear away from the appli- ance.
Warning! If a cord becomes damaged during use, disconnect the supply cord from the mains supply immediately. Do not touch the supply cord before disconnecting the supply.
uDo not use solvents or cleaning fluids to clean your product. Use a blunt scraper to remove grass and dirt.
uReplacement fans are available from a Black & Decker service agent. Use on Black & Decker recommended spare parts and accessories.
uKeep all nuts bolts and screws tight to make sure that the appliance is in a safe working condition.
Service
uHave your appliance serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the appliance is maintained.
Additional Safety instructions for blow vacs
The intended use is described in this manual. The use of any accessory or attachment or performance of any operation with this appliance other than those recommended in this instruction manual can present a risk of personal injury and/or damage to property.
uTo protect your feet and legs while operating the appli- ance, always wear heavy duty footwear and long trousers.
uAlways switch off your product, allow the fan to stop and remove the plug from the socket when:
u The supply cable has become damaged or entangled. u You leave your product unattended.
u Checking, adjusting, cleaning or working on your product.
u If the appliance starts to vibrate abnormally.
uDo not place the inlet or outlet of the sweeper near eyes or ears when operating. Never blow debris in the direction of bystanders.
uDo not use in the rain or leave outdoors while it is raining.
uDo not cross gravel paths or roads whilst your product is switched on during blow mode. Walk, never run.
uDo not place your unit down on gravel while it is switched on.
uAlways be sure of your footing, particularly on slopes. Do not overreach and keep your balance at all times.
Safety of others
uThis appliance is not intended for use by persons (includ- ing children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concern- ing use of the appliance by a person responsible for their safety.
uChildren should be supervised to ensure that they do not play with the appliance.
Residual risks.
Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include:
uInjuries caused by touching any rotating/moving parts.
uInjuries caused when changing any parts, blades or ac- cessories.
uInjuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks.
uImpairment of hearing.
uHealth hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF.)
4