Protecting the environment

switch off.

uUnplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning.

uRegularly clean the ventilation slots in your tool/appliance and charger using a soft brush or dry cloth.

uRegularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

uKeep the appliance clean and dry.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

uSafely dispose of the old plug.

uConnect the brown lead to the live terminal in the new plug.

uConnect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product avail-

zSeparate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.able for separate collection.

Local regulations may provide for separate collection of elec- trical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at

the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

(Original instructions)

ENGLISH

ZAt the end of their useful life, discard batteries with due care for our environment:Batteries

uRun the battery down completely, then remove it from the tool.

uNiCd, NiMH and Li-Ion batteries are recyclable. Place the battery(s) in a suitable packaging to ensure that the terminals cannot be short-circuited. Take them to any authorised repair agent or a local recycling station.

uDo not short-circuit the battery terminals.

uDo not dispose of the battery(s) in a fire as this may result in a risk of personal injury or an Explosion.

Technical data

		GWC1800L (H1)
Voltage	Vac	18
No Load Speed	RPM	12000

Air Volume	m3/min	2.6
Weight	kg	1.7

Battery		BL1518
Voltage	VDC	18
Capacity	Ah	1.5

Type		Li-Ion

Charger		905531** (typ. 1)
Input voltage	VAC	230
Output voltage	VDC	20.5
Current	mA	200

Hand/Arm weighted vibration value according to EN 60745:

Vibration emission value (ah) 1.7 m/s2, uncertainty (K) 1.5 m/s2

LWA (measure sound power) 84 dB(A), Uncertainty = 3 dB(A)

LWA (guaranteed sound power) 87 dB(A), Uncertainty = 3 dB(A)

switch off.

Mains plug replacement (U.K. & Ireland only)