Billy Goat MV650H owner manual Handling and Transporting, Storage

Page 17

MV650H PUSH Vacuum Owner’s Manual

Having one or more spare bags (840189) is a good way to reduce down time while dirty bags are being cleaned.

Hint!

Felt Bag (840194) accessory is great when used in dusty conditions.

HANDLING and TRANSPORTING

Using two people to lift unit is recommended. Lift holding the handle and front of nozzle. Make sure equipment is properly secured before transporting.

NEVER lift the machine while the engine is running.

STORAGE

DO NOT store engine in an enclosed or poorly ventilated area where fuel fumes may reach an open flame or spark from a furnace, water heater, clothes dryer or similar devices.

DO NOT drain fuel in an enclosed or poorly ventilated area. DO NOT smoke when draining fuel.

DO NOT remove gas cap while engine is running. DO NOT park equipment on a steep grade or slope.

ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS keep hands and feet away from moving or rotating parts. ALWAYS store fuel in approved safety containers.

If the equipment will not be used for 30 days or more, prepare as follows:

1.Make sure engine is cool.

2.Drain gasoline from carburetor and fuel tank to prevent formation of gum deposits.

3.Run engine until tank is empty and engine runs out of gas.

Fuel stabilizer (such as Sta-Bil TM) is an acceptable alternative for minimizing the formation of gum deposits during storage. Add stabilizer to gasoline in storage container or fuel tank. Follow stabilizer manufacturer’s instructions to determine proper mix ratio. Run engine at least 10 minutes after adding stabilizer to allow it to reach carburetor.

Form No F030106A

17

Part No 840186

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Billy Goat MV650H Push Vacuum About this Manual ContentsSerial Plate Data MV 650 Series SpecificationsCommon Replacement Parts General Safety Instructions and Symbols Form No F030106A Intended USE Sound DataVibration Data Engine Labels Instruction LabelsMV Vacuum Assembly Drawing Parts List 1st Assembly InstructionsHere Operation Starting Operator ControlsVacuum Nozzle Height Adjustment Vacuum Nozzle Door Adjustment Shut Down Vacuuming OperationClearing a Clogged Nozzle Debris BAGStorage Handling and TransportingImpeller Removal MaintenancePeriodic Maintenance Wiring Diagrams TroubleshootingWarranty Claim Procedure Engine Maintenance and RepairMaintenance Record Illustrated Parts List Item no Number Description QTY Nozzle Assembly Parts ListPart Engine Assembly Number Description QTY Engine Assembly Parts ListHood Assembly M B ER S C R IP T IO N Hood AssemblyRear Axle Assembly Parts List
Related manuals
Manual 28 pages 19.21 Kb

MV650H specifications

The Billy Goat MV650H is a top-of-the-line debris and leaf vacuum designed to tackle tough clean-up tasks in both residential and commercial settings. Engineered for efficiency and convenience, this powerful machine combines robust performance with a host of innovative features that make yard work simpler and more effective.

At the heart of the MV650H is its reliable Honda GX200 engine. This 4-stroke, air-cooled engine delivers a maximum of 6.5 horsepower, ensuring that users can handle even the heaviest debris with ease. The engine is designed for quick starts and smooth operation, featuring a low oil alert to prevent damage and a reliable recoil starter that provides dependable ignition every time.

One of the standout characteristics of the MV650H is its impressive suction power. The vacuum is equipped with a large, high-efficiency impeller that generates strong vacuum flows to effectively collect leaves, grass clippings, and other debris. This capability is further enhanced by the wide, 27-inch intake, allowing users to cover a larger area in less time.

Another key feature is the machine's collection bag, which holds an impressive 50 gallons of debris. This large capacity minimizes the need for frequent stops, allowing users to maximize productivity. The durable, easy-to-empty collection bag is designed for convenience, as it can be quickly removed and emptied into compost piles or yard waste bins.

The MV650H also incorporates user-friendly technologies for enhanced maneuverability. Its large, pneumatic wheels provide stability and traction across various terrains, including wet grass and uneven surfaces. The unique design allows for easy navigation around obstacles, making it ideal for both open lawns and landscaped areas.

Safety and ease of use are paramount in the construction of the MV650H. The machine features an ergonomic handle that ensures comfort during operation, and the intuitive control layout makes it accessible for users of all experience levels. Additionally, the vacuum's compact size allows for easy storage when not in use.

Overall, the Billy Goat MV650H is a powerful and efficient leaf and debris vacuum, perfect for homeowners and professionals alike. Its combination of a robust Honda engine, high-capacity collection, and user-friendly design makes it a top choice for those seeking effective yard maintenance solutions. Whether you’re tackling fall leaves or spring clean-up, the MV650H stands out as a reliable partner in outdoor maintenance.
Top Page Image Contents