Fisher & Paykel OB60N8DTX Troubleshooting, Auto, Error codes, Probe error oven centre

Troubleshooting

23

If you have a doubt about the correct functioning of your oven, this does not necessarily mean that there is a malfunction. In any event, check the following items:

Problem	Possible causes	What to do
The oven is not	The oven is not connected	Make sure that the oven is connected to the
heating	to the power supply.	power supply.
	- Your fuse is out of order.	Replace the fuse in your electrical set-up and
	- The selected temperature	check its capacity (16A).
	is too low.	Increase the selected temperature.
The oven light is	The light is out of order.	Call Customer Care.
not working.
Your oven starts	During cooking.	The recommended temperature of your
beeping.		choice has been reached.
	- At the end of a cooking	- Your programmed cooking cycle is finished.
	cycle.

The cooling fan	- The fan should work for a
continues to	maximum of one hour
operate after the	after cooking, or when the
oven stops.	oven temperature is
	greater than 125°C.

If it does not stop after 1 hour, open the oven door to accelerate the cooling down of the oven

Call Customer Care.

Important!

Repairs to your appliance should only be performed by professionals. Non-standard repairs can be a source of danger for the user.

Error codes

F01	Probe error (oven centre)
F02	Overheated oven
F05	Other cooking problems
F10	Information: Power cut during cooking
AUTO	Auto Stop: cooking time too long