TRENDnet manual Appendix A - Troubleshooting, Some Common Problems With the TW-H6W1IR

TW-H6W1IR ISDN Remote Router

Appendix A - Troubleshooting

This chapter contains some problems you may run into when using your router. After each problem description, we have provided some instructions to help you diagnose and solve the problem.

Some Common Problems With the TW-H6W1IR

None of the LEDs are on when you power up the router

??Check the power cord and the power supply and make sure it is properly connected to your TW-H6W1IR. If the error persists you may have a hardware problem. In this case you should contact technical support.

Connecting the RS-232 cable, cannot access the console program

??Check to see if the TW-H6W1IR is connected to your computer’s serial port.

??Check to see if the communications program is configured correctly. The communications software should be configured as follows:

??VT100 terminal emulation.

??9600 Baud rate.

??No parity, 8 Data bits, 1 Stop bit.

138	Appendix A -
Troubleshooting