TW-H6W1IR ISDN Remote Router
To have incoming calls directed to a device on a PHONE jack, you must enter the telephone number for the phone in the console program under the Interface Configuration, ISDN submenu.
Step 5 - Connecting Ethernet Cables to the Router
Your TW-H6W1IR has six ports for connecting 10BASE-T Ethernet devices to form a LAN. The jacks for ports 1 through 5 are wired to let you connect network end nodes (computers, servers, bridges, other routers, etc.) using standard “straight-through” EIA (Electronic Industries Association) Category 3 or higher twisted-pair cables. The jack for the sixth port is labeled Uplink and is wired to let you connect to another 10Mbps Ethernet or dual-speed hub using a straight-through cable, or an end node using a cross-wired cable.
Please refer to the following chart when deciding on the type of cable necessary for a given connection:
DEVICE | PORT | | DEVICE BEING | PORT | CABLE TO USE |
| USED | | CONNECTED | TYPE | |
| | | | | |
| | | Hub or | Norma | Crossover (X) |
| | | | l | |
| | | Switch | | |
| Norma | | Uplink | Straight-Through () |
| l | | | | |
| | | | | |
Router | | | Server (or PC) | | Straight-Through () |
| | | | | |
| | | Hub or | Norma | Straight-Through () |
| | | | l | |
| | | Switch | | |
| Uplink | | Uplink | Crossover (X) |
| | | | | |
| | | Server (or PC) | | Crossover (X) |
| | | | | |
