Dynamic IP Pool
The dynamic IP pool screen shown below contains the parameters that the router can set on the hosts. Please note that the Dynamic IP Pool cannot be enabled when the DHCP Agent feature is enabled.
The parameters are described below:
??IP Address – this is the base (starting) address for the IP pool of IP addresses to be assigned.
??Range – this is the range of contiguous, IP addresses, above the base IP Address above. In the above example, the IP addresses assigned host computers as they come onto the network would be 202.93.47.1, 202.93.47.2 … 202.93.47.100.
??Netmask – this mask informs the client, how the destination IP address is to be divided into network, subnet and host parts. The netmask has ones in the bit positions in the
62 | Configuration and |
Management