TRENDnet TW-H6W1IR manual Important Notes on Ethernet Connections

TW-H6W1IR ISDN Remote Router

The figure below shows how to make an Ethernet connection between the router and a network end node.

Important Notes on Ethernet Connections

Observe the following rules when connecting devices with twisted-pair Ethernet cables:

??For both end-node and uplink connections, use only EIA Category 3 or higher-grade twisted-pair data cables with RJ-45 plugs. In almost all cases, only standard straight-through cables are needed.

??Make sure no cable is more than 100 meters (328 feet) long.

??When uplinking two hubs together with a straight-through cable, use an uplink-type jack at one end, and an end-node-type jack at the other.

Installation 19