TRENDnet TW-H6W1IR manual Dial-In User Profile

TW-H6W1IR ISDN Remote Router

or ISDN2) that is used to connect to the Internet. Also, if the Peer IP is set as the default gateway here, you still need to define a static default route in the Network Configuration, IP Static Route submenu, but you don’t need to designate a gateway IP address for the static route (the routers will automatically negotiate and adjust the gateway IP setting accordingly). And also make sure that the Remote IP Address in the Remote Networks Profile is set to

0.0.0.0.Note that only one ISDN circuit should be connected to the Internet, and only one ISDN circuit (the same one) should be the default gateway.

Dial-In User Profile

The Dial-In User Profile is used to configure the TW-H6W1IR for single users (for example a person working at home) to dial in to the router and gain access to the network. At least one User Profile must be configured for each user who will dial in (in conjunction with Dial Configuration settings). Please note that WAN connections to computers on other networks must be defined in the Remote Network Profile submenu.

Up to eight users can be set up to dial in to the router. However, more dial-in users can be accommodated by using a Radius server as described in the Radius Configuration section of this manual. Please note that when a Radius server is being used, the Dial-in User Profiles will be disabled.

The Dial-In User Profile submenu appears below:

Configuration and Management 55