hitting ENTER (in the window shown above, this corresponds to the field ‘Branch1’). After configuring the NAT options in the Name field, you must save the changes, EXIT, and position the cursor over the NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows:
The parameters are described as follows:
??Name – this is a 12 character, alphanumeric,
??Global Interface – this is the interface corresponding to the Global IP and Range parameters, in the NAT table, to form unique IP address[es], known to the outside (regional or Internet) routers, on this interface.
86 | Configuration and |
Management
