TRENDnet TW-H6W1IR manual Configuring a Filter Set

TW-H6W1IR ISDN Remote Router

internetwork traffic; and you can configure a filter at the data-link layer (a general filter) to provide a protocol independent filter.

Good knowledge of network protocols is required to configure a specific filter appropriately. It is important for the router to operate correctly, therefore, necessary packets must be allowed to pass through the filters. In other words, do not attempt to configure filters on a utilized router unless you understand what you are doing.

The following section describes how to configure the router filter parameters.

Configuring a Filter Set

Under the Advanced Functions menu, select and enter Filter

Configuration. You will see the following screen:

The three sub-menus are described as follows:

66 Configuration and

Management