?? IP Address – This is the IP Address of the device that the router will attempt to reach. The router will check it routing table and try to locate the IP Address.
?? Count – The number of pings (packets) that will be sent. A value of 0 will cause pings to be sent continuously.
?? Delay (10ms) – The amount of time in 10 millisecond intervals between each ping in the Count.
?? Start Ping Test - Press <Enter> or <Return> to begin the test.
Loopback Test
The loopback test is used to test the path ISDN network between your phone company’s switch and the router.
120 | Configuration and Management |
