TW-H6W1IR ISDN Remote Router
seconds, ISDN 2 will hang up and all traffic will be handled by ISDN 1.
For the above configuration to work, both ISDN ports need to have been properly setup to establish dial-out PPP connections, and have Multi-Link enabled. Also note that ISDN 1, being the B-channel that initiated the call in the MLPPP bundle and thus the primary link, is not subject to the BOD Low Threshold parameter and will never hang up due to BOD considerations. The primary link can, however, be subject to Dial on Demand (DOD) settings, and could thus disconnect if Dial on Demand is enabled and the Idle Time parameter is met. Dial on Demand settings are located in the Advanced Functions, Dial Configuration submenu.
ISDN Link 1 and 2
Stac Compression – this is an industry standard 4:1compression scheme. When enabled, the router will try to use Stac compression on the designated ISDN port whenever possible. If the destination device