??Operation – this comparison operation is applied to the destination port (the Dst Port parameter) value, of the TCP or UDP header.
??ICMP Type – this is the type field, in the ICMP header, used to identify a particular ICMP message.
??ICMP Code – this is the code field, in the ICMP header, used to further specify the ICMP type.
??TCP Flag – this is a hex number, representing the six flag bits in the TCP header. The value range is from 0 to 3F.
Multiple Home Configuration
Besides the IP address assigned to the LAN interface in the Network Configuration menu, the LAN may have up to 3 additional IP interfaces. These additional IP interfaces are referred to as MIP1 to MIP3. This type of configuration is known as a multiple home configuration.
Multiple Home can be demonstrated by this example:
72 | Configuration and |
Management