TRENDnet TW-H6W1IR manual Filter Configuration

TW-H6W1IR ISDN Remote Router

Items are described as follows:

??DHCP Server IP Address – this is the IP address of the remote DHCP server. When a local computer powers up and sends a DHCP request for an IP address, the TW-H6W1IR will forward the request to the address specified here.

??Time Threshold – this specifies the maximum amount of time (in seconds) since the host began requesting an IP address. If the value define here is exceeded, the relay agent will not pass along the request from the host.

??State – enables/disables the DHCP Relay Agent function.

Filter Configuration

Your TW-H6W1IR uses filters (configurable at two layers) to screen packet data, and apply a routing decision. There are two methods for configuring filters: you can configure a filter at the network layer (IP filter) to restrict access between networks and reduce unnecessary

Configuration and Management 65