To log on to the router, use the factory set username and password ‘Admin’ (without the quotes). Please note that the user name and password are
Upon entering the username and password (using the <tab> key to jump to the next field), position the cursor on OK and press <Enter>. You will then see the following Main Menu:
Step 7 - Configuring the LAN Port
Preparing the router for connection to a LAN only requires enabling the LAN port, enabling IP networking, assigning the LAN port an IP address and enabling telnet (if necessary). After the LAN port is configured, all other features on the router can be configured remotely through the LAN by using the included
To configure the LAN:
22 | Installation |