will be recognized by the interface in the Global Interface parameter.
??Range – this is the range of contiguous, global addresses above (and including) the base Global IP.
??Local IP – an IP Address that is only used in the stub domain since it is not unique. It is the base, local address for the local addresses that will be recognized by the interface in the Local Interface parameter.
??Range – this is the range of contiguous local addresses above (and including) the base Local IP.
??State – this toggles the enable, disable, for this NAT entry.
Dynamic NAPT
This screen (below) is how the NAT IP Pool appears, if Dynamic NAPT was chosen for the Translation Mode parameter. Each entry, in this configuration, can be used to map a single global address and multiple, contiguous local addresses to each other.
Configuration and Management | 89 |
