TRENDnet TW-H6W1IR manual Configuration and Management

TW-H6W1IR ISDN Remote Router

??ISDN Data – this field must contain the incoming telephone number for data calls. In other words, it is your ISDN line’s data phone number.

??A/B Adapter 1 and 2 – enter the telephone numbers for your voice/analog lines.

??Phone 1 and 2 Call Waiting – If you have applied for and received call waiting capabilities for your ISDN voice lines, you must enable these settings in order for the call waiting feature to function.

There are 4 special operations for using call waiting (flash means a very brief hanging up of the phone. In other words, for the first option below, flash 0, click the hang up button on your phone very quickly and then press the number 0 on your telephone’s keypad):

Flash 0 – disconnect the first phone call established. Flash 1 – disconnect the second phone call established. Flash 2 – switch between the two phone calls.

Flash 3 – speak to both parties simultaneously (if conference calling is enabled by your phone company).

??POTS Lines – [Plain Old Telephone Service]. Enables or disables phone calls on the Phone 1 and Phone 2 jacks on the rear of the router.

??Global Reception – When this is enabled, the Phone 1 and Phone 2 jacks will receive all phone calls directed to them by the telephone company’s switch. When disabled, the router will check incoming calls to the Phone 1 and 2 jacks against the telephone numbers specified in the A/B Adapter 1 and 2 fields above.

Configuration and Management 33