6
Installation instructions
Electrical specifications
Electrical connection rating: 3.135 kW
Voltage/frequency:
Current: 16 A
Electrical connection
The appliance must be fitted correctly to guarantee electrical safety. During fitting and maintenance operations, the appliance must be disconnected from the electrical grid; fuses must be switched off or removed. The electrical connections are made before the appliance is installed in its housing. Ensure that:
the electrical installation has sufficient voltage, the electrical wires are in good condition,
the diameter of the wires complies with the installation requirements.
the oven is connected to a single phase
a suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the requirements)
the isolating switch will be easily accessible to the customer with the oven installed.
Important!
The safety wire
If the power cable is damaged, it should be replaced by the manufacturer, its
We cannot be held responsible for any accident resulting from inexistent, defective or incorrect earthing.
If the electrical installation in your residence requires any changes in order to hook up your appliance, call upon a professional electrician.
If the oven malfunctions in any way, disconnect it from the power supply or remove the fuse corresponding to the sector where the oven is hooked up.
