Billy Goat P / N 440140, P / N 440120 owner manual Troubleshooting, Warranty Claim Procedure

Page 13

FORCE BLOWER Owner’s Manual

TROUBLESHOOTING

Problem

Possible Cause

Solution

Abnorm al vibration.

· Loose or out of balance im peller.

· Check im peller and replace if required.

 

· Loose engine.

· Check engine.

 

 

 

Engine will not start.

· Engine not in full choke position.

· Check choke position.

 

· Out of gasoline or bad, old gasoline.

· Check gasoline.

 

· Spark Plug wire disconnected.

· Connect spark plug wire.

 

· Gas valve off.

· Turn on gas valve.

 

· Dirty air cleaner.

· Clean or replace air cleaner. Contact a

 

 

qualified service person.

Engine is locked, will not pull

· Engine problem .

· Contact an engine servicing dealer for

over.

 

engine problem s.

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization.

To reach:

American Honda: 800-426-7701

Subaru America: 800-277-6246

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows:

•The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.

•The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

•The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim.

•The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

•The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

•The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.

For online product registration go to www.billygoat.com

Part No 440021

13

Form No F101706A

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Billy Goat Force Blower About this Manual ContentsSerial Plate Data Specifications F900SGeneral Safety Instructions and Symbols Form No F101706A Vibration Data SoundIntended USE Engine Labels Instruction LabelsParts BAG Literature Assy Packing ChecklistFigure a AssemblyOperation If Your Unit Fails to Start See Troubleshooting onAdjusting AIR Director Periodic Maintenance MaintenanceWarranty Claim Procedure TroubleshootingIllustrated Parts List F1300H F900H F900S Parts ListMaintenance Record

P / N 440140, P / N 440120 specifications

The Billy Goat P/N 440140 and P/N 440120 are renowned among professional landscapers and homeowners alike for their exceptional performance and reliability in the field of outdoor maintenance equipment. These powerful and efficient units are designed to make tasks like lawn and debris cleanup, as well as leaf management, significantly easier and quicker.

One of the main features of both models is their robust engine. The Billy Goat P/N 440140 is equipped with a reliable 11-foot-pound torque engine, while the P/N 440120 boasts a powerful 9-foot-pound torque engine. This impressive power allows the machines to tackle even the toughest cleanup jobs, from wet leaves to dense debris, without losing performance. The engines are designed to provide a smooth and consistent operation, reducing downtime and increasing productivity on any given job.

Another significant characteristic of these models is their self-propelled design, which utilizes a variable speed system. This feature enables operators to adjust the speed according to the terrain and the specific needs of the task at hand, promoting efficiency. The ease of maneuverability offered by these self-propelled units allows landscapers to cover large areas with minimal effort, making them ideal for both residential and commercial applications.

The Billy Goat P/N 440140 and P/N 440120 also incorporate advanced debris management technology. They are equipped with a powerful vacuum system that effectively collects leaves, grass clippings, and other types of debris, significantly reducing the time spent on cleanup chores. The high-capacity debris bags allow for prolonged work sessions without frequent emptying, enhancing productivity.

Durability is another hallmark of these machines. Built with heavy-duty materials, both models are designed to withstand the rigors of regular use in demanding outdoor conditions. Their reinforced frames and high-quality components ensure longevity, providing users with a reliable tool that stands the test of time.

Ergonomics have not been overlooked in these designs. The operator-friendly controls and comfortable grips reduce fatigue during long work sessions, delivering an enhanced user experience. The compact design of both models also allows for easy storage and transport, a crucial feature for landscaping professionals on the move.

In conclusion, the Billy Goat P/N 440140 and P/N 440120 exemplify efficiency, power, and durability, making them indispensable tools for those seeking to maintain pristine outdoor spaces. With their advanced features and exceptional performance, they continue to be a top choice for landscaping professionals and homeowners alike.
Top Page Image Contents