OPERATING INSTRUCTIONS
Before you begin using the RX16 receiver, make sure the IR transmitter being used is transmitting on 2.3 MHz or 2.8 MHz frequencies. Make sure the audio source is on, and the receiver battery is fully charged.
The RX16 Receiver has an automatic on/off function. When you put the receiver on, it turns on. When you take the receiver off, it turns off. Use the
A dual detector infrared “eye” is located on the front of the receiver. Do not cover it up or you will lose reception. Make sure the “SOUND PLUS” label is facing away from you when you put the receiver on.
The RX16 Receiver should be charged when not in use.
Optional multiple battery charger: CHG 238. Charges up to 12 BAT AP97A NiMH rechargeable batteries
Fig. A (Front View)
Frequency Selection
Switch: 2.3 MHz,
2.8 MHz, Stereo
Volume Control Knob
Sound Plus ®
BAT AP97A
Rechargeable NiMH Battery
3